MPX5010GS
Product Overview
Category
The MPX5010GS belongs to the category of pressure sensors.
Use
It is used for measuring absolute pressure in various applications.
Characteristics
- Small and compact design
- High sensitivity and accuracy
- Wide operating temperature range
- Low power consumption
Package
The MPX5010GS is available in a surface-mount package.
Essence
The essence of the MPX5010GS lies in its ability to provide precise and reliable pressure measurements in a compact form factor.
Packaging/Quantity
Typically, the MPX5010GS is available in reels containing multiple units.
Specifications
- Pressure Range: 0 to 10 kPa
- Supply Voltage: 4.75 to 5.25 V
- Output Voltage: 0.2 to 4.7 V
- Operating Temperature: -40°C to 125°C
- Accuracy: ±1.5% Full Scale
Detailed Pin Configuration
The MPX5010GS has a total of 6 pins: 1. Vout (Output Voltage) 2. Vss (Ground) 3. Vdd (Supply Voltage) 4. N/C (No Connection) 5. N/C (No Connection) 6. N/C (No Connection)
Functional Features
- Ratiometric output
- Integrated temperature compensation
- Overvoltage protection
- High burst pressure capability
Advantages and Disadvantages
Advantages
- High accuracy
- Wide operating temperature range
- Compact size
- Low power consumption
Disadvantages
- Limited pressure range
- Sensitivity to electromagnetic interference
Working Principles
The MPX5010GS utilizes piezoresistive technology to measure pressure. When pressure is applied, the resistance of the sensing element changes, resulting in a corresponding change in output voltage.
Detailed Application Field Plans
The MPX5010GS is commonly used in the following applications: - Medical devices - HVAC systems - Industrial automation - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the MPX5010GS include: - MPX5700AP - MPXV5010G - MPXHZ6250AC6T1
In conclusion, the MPX5010GS is a versatile pressure sensor known for its high accuracy and compact design. With its wide range of applications and reliable performance, it continues to be a popular choice in various industries.
기술 솔루션에 MPX5010GS 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure, here are 10 common questions and answers related to the application of MPX5010GS:
What is MPX5010GS?
- MPX5010GS is a pressure sensor that provides a calibrated output for pressure ranges from 0 to 10 kPa.
How does MPX5010GS work?
- It works on the principle of piezoresistive sensing, where changes in pressure cause a corresponding change in resistance, which is then converted into an electrical signal.
What are the typical applications of MPX5010GS?
- MPX5010GS is commonly used in medical devices, industrial automation, automotive systems, and HVAC systems for pressure measurement and control.
What is the operating voltage range for MPX5010GS?
- The operating voltage range is typically 4.75V to 5.25V.
What is the output signal of MPX5010GS?
- The output signal is an analog voltage proportional to the applied pressure, typically around 0.2V to 4.7V for the specified pressure range.
How accurate is MPX5010GS?
- It has an accuracy of around ±1.5% full scale over the specified temperature range.
Can MPX5010GS be used for measuring liquids or gases?
- It is designed for measuring non-corrosive, non-ionic gases only.
What is the response time of MPX5010GS?
- The response time is typically less than 1ms.
Does MPX5010GS require calibration?
- It comes factory-calibrated, but some applications may require additional calibration for specific accuracy requirements.
Can MPX5010GS be used in harsh environments?
- It can withstand some level of harsh environments, but it is recommended to consult the datasheet for specific environmental limitations and considerations.
I hope these questions and answers are helpful for your technical solutions! Let me know if you need further assistance.