2N5210_D81Z
Product Overview
Category
The 2N5210_D81Z belongs to the category of bipolar junction transistors (BJTs).
Use
It is commonly used as an amplifier or switch in electronic circuits.
Characteristics
- Low power dissipation
- High current gain
- Low noise
Package
The 2N5210_D81Z is typically available in a TO-92 package.
Essence
This transistor is essential for amplifying and switching signals in various electronic applications.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Maximum Collector-Emitter Voltage: 40V
- Maximum Collector Current: 200mA
- Power Dissipation: 625mW
- Transition Frequency: 250MHz
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The 2N5210_D81Z has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)
Functional Features
- High voltage capability
- Fast switching speed
- Low saturation voltage
Advantages
- Versatile applications
- Reliable performance
- Wide operating temperature range
Disadvantages
- Limited power handling capacity
- Sensitive to temperature variations
Working Principles
The 2N5210_D81Z operates based on the principles of controlling current flow through its three terminals to amplify or switch electronic signals.
Detailed Application Field Plans
This transistor is widely used in audio amplifiers, signal processing circuits, and low-power switching applications due to its high current gain and low noise characteristics.
Detailed and Complete Alternative Models
Some alternative models to the 2N5210_D81Z include: - BC547 - 2N3904 - 2N2222
In conclusion, the 2N5210_D81Z is a versatile BJT that finds extensive use in various electronic circuits, offering reliable performance and wide application potential.
[Word count: 298]
기술 솔루션에 2N5210_D81Z 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the 2N5210_D81Z transistor used for?
- The 2N5210_D81Z is a general-purpose PNP transistor commonly used in amplification and switching applications.
What are the key specifications of the 2N5210_D81Z transistor?
- The 2N5210_D81Z has a maximum collector-base voltage of 80V, a collector current of 0.5A, and a power dissipation of 0.625W.
How can I identify the pinout of the 2N5210_D81Z transistor?
- The pinout of the 2N5210_D81Z transistor is typically identified as the emitter (E), base (B), and collector (C) pins.
What are some common circuit configurations using the 2N5210_D81Z transistor?
- The 2N5210_D81Z can be used in common emitter, common collector, and common base configurations for various amplification and switching purposes.
What are the typical applications of the 2N5210_D81Z transistor?
- The 2N5210_D81Z is commonly used in audio amplifiers, signal processing circuits, and low-power switching applications.
What are the temperature considerations for the 2N5210_D81Z transistor?
- The 2N5210_D81Z has a maximum operating temperature of 150°C, making it suitable for a wide range of environments.
Can the 2N5210_D81Z be used in high-frequency applications?
- While the 2N5210_D81Z can be used in moderate frequency applications, it may not be suitable for very high-frequency designs due to its transition frequency characteristics.
What are the recommended biasing and operating conditions for the 2N5210_D81Z transistor?
- The 2N5210_D81Z typically operates with a base-emitter voltage of around 5V and a collector current of up to 500mA.
Are there any common failure modes or reliability concerns with the 2N5210_D81Z transistor?
- Common failure modes include thermal runaway under high current conditions, so proper heat sinking and current limiting are important for reliable operation.
Where can I find detailed datasheets and application notes for the 2N5210_D81Z transistor?
- Datasheets and application notes for the 2N5210_D81Z can be obtained from semiconductor manufacturers' websites or electronic component distributors.