The ADT7488AARMZ-RL belongs to the category of temperature sensor integrated circuits.
This product is primarily used for accurately measuring and monitoring temperature in various electronic devices and systems.
The ADT7488AARMZ-RL is available in a small outline integrated circuit (SOIC) package. It is typically sold in reels containing a specified quantity of units.
The ADT7488AARMZ-RL features an 8-pin SOIC package with the following pin configuration:
The ADT7488AARMZ-RL utilizes a built-in temperature sensor to measure the ambient temperature. It converts the analog temperature signal into a digital format using an internal analog-to-digital converter (ADC). The digital temperature data is then made available through the I2C/SMBus interface for further processing by a microcontroller or other digital devices.
The ADT7488AARMZ-RL finds application in various fields, including but not limited to:
These alternative models offer similar functionality and can be considered as substitutes for the ADT7488AARMZ-RL in various applications.
Word count: 570 words
Sure! Here are 10 common questions and answers related to the application of ADT7488AARMZ-RL in technical solutions:
Q: What is the ADT7488AARMZ-RL? A: The ADT7488AARMZ-RL is a temperature sensor and fan controller IC designed for monitoring and controlling temperature in various applications.
Q: What is the operating voltage range of the ADT7488AARMZ-RL? A: The ADT7488AARMZ-RL operates within a voltage range of 2.7V to 5.5V.
Q: How many temperature channels does the ADT7488AARMZ-RL support? A: The ADT7488AARMZ-RL supports up to 8 temperature channels.
Q: Can the ADT7488AARMZ-RL measure temperatures below freezing point? A: Yes, the ADT7488AARMZ-RL can measure temperatures below freezing point as it has a wide temperature measurement range.
Q: Does the ADT7488AARMZ-RL have built-in fan control capabilities? A: Yes, the ADT7488AARMZ-RL has integrated PWM outputs that can be used for fan control based on temperature readings.
Q: What communication interface does the ADT7488AARMZ-RL use? A: The ADT7488AARMZ-RL uses the I2C (Inter-Integrated Circuit) communication interface.
Q: Can the ADT7488AARMZ-RL be used in battery-powered applications? A: Yes, the ADT7488AARMZ-RL has a low power consumption and can be used in battery-powered applications.
Q: Is the ADT7488AARMZ-RL compatible with microcontrollers and microprocessors? A: Yes, the ADT7488AARMZ-RL is compatible with most microcontrollers and microprocessors that support I2C communication.
Q: Can the ADT7488AARMZ-RL be used in industrial temperature monitoring systems? A: Yes, the ADT7488AARMZ-RL is suitable for industrial applications as it can operate within a wide temperature range.
Q: Are there any evaluation boards or development kits available for the ADT7488AARMZ-RL? A: Yes, Analog Devices provides evaluation boards and development kits for the ADT7488AARMZ-RL to facilitate its integration into technical solutions.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.