ON Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
CAT5111ZI00
자세히보기 데이터시트

CAT5111ZI00

Product Overview

Category: Integrated Circuit (IC)

Use: Digital Potentiometer

Characteristics: - Low power consumption - High resolution - Non-volatile memory - Wide operating voltage range

Package: SOIC (Small Outline Integrated Circuit)

Essence: The CAT5111ZI00 is a digital potentiometer IC that provides a variable resistance in electronic circuits. It can be controlled digitally, allowing for precise adjustment of resistance values.

Packaging/Quantity: The CAT5111ZI00 is available in a standard SOIC package and is typically sold in reels of 2500 units.

Specifications

  • Resolution: 256 taps
  • Resistance Range: 10kΩ
  • Operating Voltage Range: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • End-to-End Resistance Tolerance: ±20%
  • Power Supply Current: 1µA (standby), 3mA (active)
  • Non-Volatile Memory: Yes

Pin Configuration

The CAT5111ZI00 has a total of 8 pins:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. CS: Chip select input
  4. U/D: Up/Down control input
  5. INC: Increment control input
  6. W: Wiper terminal
  7. A: Terminal A of the resistor array
  8. B: Terminal B of the resistor array

Functional Features

  • Digital control allows for precise adjustment of resistance
  • Non-volatile memory retains wiper position during power-off cycles
  • Low power consumption extends battery life in portable devices
  • High resolution provides fine-grained adjustment capabilities
  • Wide operating voltage range enables compatibility with various systems

Advantages and Disadvantages

Advantages: - Precise resistance adjustment - Non-volatile memory for retaining settings - Low power consumption - High resolution

Disadvantages: - Limited resistance range (10kΩ) - End-to-end resistance tolerance of ±20%

Working Principles

The CAT5111ZI00 utilizes a resistor ladder network controlled by digital signals to adjust the resistance value. The wiper terminal, connected to the resistor array, moves along the ladder based on the control inputs received. This movement changes the effective resistance between terminals A and B, allowing for precise adjustment.

Detailed Application Field Plans

The CAT5111ZI00 is commonly used in various applications, including: - Audio equipment: Volume control, tone adjustment - Industrial automation: Calibration, signal conditioning - Test and measurement instruments: Fine-tuning, calibration - Communication systems: Signal processing, gain control

Alternative Models

  • CAT5111WI00: Same specifications, but available in a DIP package
  • CAT5111YI00: Same specifications, but with a different resistance range (100kΩ)

These alternative models provide similar functionality and can be used as substitutes for the CAT5111ZI00 in different applications.

Word count: 409

기술 솔루션에 CAT5111ZI00 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of CAT5111ZI00 in technical solutions:

  1. Question: What is CAT5111ZI00?
    Answer: CAT5111ZI00 is a digitally programmable potentiometer (DPP) that can be used in various technical applications.

  2. Question: What is the purpose of using CAT5111ZI00 in technical solutions?
    Answer: CAT5111ZI00 can be used as a variable resistor or a voltage divider in electronic circuits, allowing for precise control and adjustment of resistance values.

  3. Question: What is the operating voltage range of CAT5111ZI00?
    Answer: CAT5111ZI00 operates within a voltage range of 2.7V to 5.5V.

  4. Question: Can CAT5111ZI00 be used in both analog and digital circuits?
    Answer: Yes, CAT5111ZI00 can be used in both analog and digital circuits, making it versatile for different technical solutions.

  5. Question: How is CAT5111ZI00 programmed?
    Answer: CAT5111ZI00 can be programmed through a serial interface using standard microcontroller communication protocols such as I2C.

  6. Question: What is the resolution of CAT5111ZI00?
    Answer: CAT5111ZI00 has a resolution of 256 taps, allowing for fine-grained adjustments in resistance values.

  7. Question: Can CAT5111ZI00 withstand high temperatures?
    Answer: Yes, CAT5111ZI00 is designed to operate within a wide temperature range, typically from -40°C to +125°C.

  8. Question: Is CAT5111ZI00 suitable for low-power applications?
    Answer: Yes, CAT5111ZI00 has low power consumption and is suitable for battery-powered or energy-efficient applications.

  9. Question: Can multiple CAT5111ZI00 devices be used together in a circuit?
    Answer: Yes, multiple CAT5111ZI00 devices can be cascaded or connected in parallel to achieve higher resistance values or more precise control.

  10. Question: Are there any application examples where CAT5111ZI00 is commonly used?
    Answer: Yes, CAT5111ZI00 is commonly used in audio equipment, instrumentation, industrial control systems, and other electronic devices that require adjustable resistance.