이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
CAT5113VI01

CAT5113VI01

Basic Information Overview

  • Category: Electronic Component
  • Use: Digital Potentiometer
  • Characteristics:
    • Low power consumption
    • Wide operating voltage range
    • High resolution
    • Non-volatile memory
  • Package: SOIC-8
  • Essence: Programmable resistor
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resolution: 256 taps
  • Resistance Range: 0 to 100 kΩ
  • Operating Voltage Range: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • End-to-End Resistance Tolerance: ±20%
  • Non-Volatile Memory: Yes

Detailed Pin Configuration

  1. VCC: Power supply voltage
  2. SDA: Serial data input/output
  3. SCL: Serial clock input
  4. GND: Ground
  5. A0: Address bit 0
  6. A1: Address bit 1
  7. WP: Write protect
  8. H: High impedance terminal

Functional Features

  • Digital control of resistance value
  • Non-volatile memory for storing settings
  • I2C interface for easy communication with microcontrollers
  • Low power consumption for energy-efficient applications
  • High resolution for precise adjustment of resistance

Advantages

  • Allows precise and digital control of resistance
  • Non-volatile memory retains settings even when power is disconnected
  • Wide operating voltage range enables compatibility with various systems
  • High resolution provides fine-grained adjustment options
  • Low power consumption prolongs battery life in portable devices

Disadvantages

  • Limited end-to-end resistance tolerance may not suit all applications
  • Requires I2C interface for control, limiting compatibility with certain systems
  • Only available in SOIC-8 package, may not fit all design requirements

Working Principles

The CAT5113VI01 is a digital potentiometer that utilizes a series of resistive elements and switches to achieve programmable resistance. It can be controlled digitally through the I2C interface, allowing precise adjustment of the resistance value. The non-volatile memory ensures that the settings are retained even when power is disconnected.

Detailed Application Field Plans

  • Audio equipment: Volume control, tone adjustment
  • Industrial automation: Calibration, fine-tuning
  • Test and measurement instruments: Resistance simulation, signal conditioning
  • Consumer electronics: Brightness control, color adjustment

Detailed and Complete Alternative Models

  1. CAT5113VI02: Similar specifications, different package (MSOP-8)
  2. CAT5113VI03: Higher resolution (1024 taps), similar specifications
  3. CAT5113VI04: Lower resistance range (0 to 50 kΩ), similar specifications

Note: This entry provides an overview of the CAT5113VI01 digital potentiometer. For more detailed information, please refer to the datasheet provided by the manufacturer.

Word Count: 314

기술 솔루션에 CAT5113VI01 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of CAT5113VI01 in technical solutions:

  1. Question: What is CAT5113VI01?
    Answer: CAT5113VI01 is a digitally programmable potentiometer (DPP) that can be used in various technical applications.

  2. Question: What is the purpose of using CAT5113VI01 in technical solutions?
    Answer: CAT5113VI01 can be used as a variable resistor or voltage divider in electronic circuits, allowing for precise control and adjustment of resistance values.

  3. Question: What is the operating voltage range of CAT5113VI01?
    Answer: CAT5113VI01 operates within a voltage range of 2.7V to 5.5V.

  4. Question: How many taps does CAT5113VI01 have?
    Answer: CAT5113VI01 has 32 taps, which means it can provide 32 different resistance values.

  5. Question: Can CAT5113VI01 be controlled digitally?
    Answer: Yes, CAT5113VI01 can be controlled digitally through an I2C interface, allowing for easy integration into microcontroller-based systems.

  6. Question: What is the resolution of CAT5113VI01?
    Answer: CAT5113VI01 has a resolution of 256 steps, providing fine-grained control over resistance values.

  7. Question: Is CAT5113VI01 suitable for low-power applications?
    Answer: Yes, CAT5113VI01 has a low quiescent current and is designed for low-power applications, making it energy-efficient.

  8. Question: Can CAT5113VI01 withstand high temperatures?
    Answer: CAT5113VI01 has a wide temperature range of -40°C to +125°C, making it suitable for use in various environments.

  9. Question: Can CAT5113VI01 be used in audio applications?
    Answer: Yes, CAT5113VI01 can be used in audio applications for volume control or tone adjustment purposes.

  10. Question: Are there any evaluation boards available for CAT5113VI01?
    Answer: Yes, ON Semiconductor provides evaluation boards and software tools to facilitate the testing and integration of CAT5113VI01 into technical solutions.

Please note that these questions and answers are general and may vary depending on specific application requirements.