MC10E137FNR2

Product Overview

Category: Integrated Circuit (IC)

Use: The MC10E137FNR2 is a high-speed, low-power ECL (Emitter-Coupled Logic) 9-bit binary counter. It is designed for use in applications that require precise and fast counting of binary signals.

Characteristics: - High-speed operation - Low power consumption - 9-bit binary counter - ECL logic family - Wide operating voltage range

Package: The MC10E137FNR2 is available in a small outline integrated circuit (SOIC) package. This package provides excellent thermal performance and ease of handling during assembly.

Essence: The essence of the MC10E137FNR2 lies in its ability to accurately count binary signals at high speeds while consuming minimal power.

Packaging/Quantity: The MC10E137FNR2 is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

Supply Voltage Range: -4.2V to -5.7V
Operating Temperature Range: -40°C to +85°C
Maximum Clock Frequency: 1.6 GHz
Power Dissipation: 500 mW
Output Current: ±50 mA

Detailed Pin Configuration

The MC10E137FNR2 has a total of 20 pins, each serving a specific function. Here is the detailed pin configuration:

VEE (Negative Power Supply)
Q0 (Output 0)
Q1 (Output 1)
Q2 (Output 2)
Q3 (Output 3)
Q4 (Output 4)
Q5 (Output 5)
Q6 (Output 6)
Q7 (Output 7)
Q8 (Output 8)
GND (Ground)
CLK (Clock Input)
CE (Count Enable)
PECL Mode
VCC (Positive Power Supply)
Q8' (Complementary Output 8)
Q7' (Complementary Output 7)
Q6' (Complementary Output 6)
Q5' (Complementary Output 5)
Q4' (Complementary Output 4)

Functional Features

High-speed counting: The MC10E137FNR2 can count binary signals at a maximum clock frequency of 1.6 GHz, making it suitable for applications that require fast counting.
Low power consumption: This IC is designed to operate with minimal power dissipation, making it energy-efficient and suitable for battery-powered devices.
Wide operating voltage range: The MC10E137FNR2 can operate within a supply voltage range of -4.2V to -5.7V, providing flexibility in various electronic systems.

Advantages and Disadvantages

Advantages: - High-speed operation allows for precise counting in time-critical applications. - Low power consumption prolongs battery life and reduces energy costs. - Wide operating voltage range provides compatibility with different power supply configurations.

Disadvantages: - Limited to ECL logic family, which may not be compatible with other logic families without additional interface circuitry. - Requires careful handling during assembly due to the small outline integrated circuit (SOIC) package.

Working Principles

The MC10E137FNR2 operates based on the principles of Emitter-Coupled Logic (ECL). It utilizes differential signaling and current steering techniques to achieve high-speed and low-power operation. The clock input triggers the counter, and the outputs represent the binary count value.

Detailed Application Field Plans

The MC10E137FNR2 finds applications in various fields that require precise and fast counting of binary signals. Some detailed application field plans include:

Telecommunications: The IC can be used in high-speed data transmission systems to count incoming bits accurately.
Test and Measurement Equipment: It can be employed in frequency counters and digital signal analyzers for precise frequency measurement.
Industrial Automation: The IC can be utilized in control systems that require accurate counting, such as motor speed control or position sensing.

Detailed and Complete Alternative Models

MC10ELT21: 8-bit differential ECL counter
MC100EP16: 9-bit differential ECL counter with synchronous reset
MC100LVEL11: 9-bit differential ECL counter with asynchronous reset

These alternative models offer similar functionality to the MC10E137FNR2 and can be considered as alternatives based on specific requirements.

In conclusion, the MC10E137FNR2 is a high-speed, low-power ECL 9-bit binary counter. Its key features include high-speed operation, low power consumption, and wide operating voltage range

기술 솔루션에 MC10E137FNR2 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MC10E137FNR2 in technical solutions:

Q: What is MC10E137FNR2? A: MC10E137FNR2 is a specific type of integrated circuit (IC) that belongs to the MC10E series. It is commonly used in high-speed digital applications.
Q: What are the key features of MC10E137FNR2? A: MC10E137FNR2 features differential inputs, ECL outputs, and a wide operating voltage range. It also has a built-in internal bias network.
Q: What is the typical operating frequency range for MC10E137FNR2? A: The typical operating frequency range for MC10E137FNR2 is from DC to 1.5 GHz.
Q: How can MC10E137FNR2 be used in technical solutions? A: MC10E137FNR2 can be used as a clock driver, frequency divider, or phase-locked loop (PLL) component in various high-speed digital systems.
Q: What is the power supply requirement for MC10E137FNR2? A: MC10E137FNR2 requires a dual power supply with voltages typically ranging from -5.2V to -3.8V.
Q: Can MC10E137FNR2 operate at different temperature ranges? A: Yes, MC10E137FNR2 is designed to operate within a specified temperature range, typically from -40°C to +85°C.
Q: Does MC10E137FNR2 have any built-in protection features? A: No, MC10E137FNR2 does not have built-in protection features. External circuitry may be required for overvoltage or ESD protection.
Q: What is the package type for MC10E137FNR2? A: MC10E137FNR2 is available in a 28-pin PLCC (Plastic Leaded Chip Carrier) package.
Q: Are there any recommended applications notes or reference designs available for MC10E137FNR2? A: Yes, the manufacturer of MC10E137FNR2 provides application notes and reference designs that can help with its implementation in various technical solutions.
Q: Where can I purchase MC10E137FNR2? A: MC10E137FNR2 can be purchased from authorized distributors or directly from the manufacturer's website.