MC74LCX373DWR2
Product Overview
- Category: Integrated Circuit (IC)
- Use: Digital Logic
- Characteristics: High-speed, low-voltage, octal transparent latch
- Package: SOIC-20
- Essence: Latch with 8-bit storage capability
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Supply Voltage Range: 2.3V to 3.6V
- High-Level Input Voltage: 2.0V (min), VCC (max)
- Low-Level Input Voltage: GND (min), 0.8V (max)
- High-Level Output Voltage: VCC - 0.5V (min), VCC (max)
- Low-Level Output Voltage: GND (min), 0.5V (max)
- Maximum Operating Frequency: 200MHz
- Propagation Delay Time: 4.5ns (typical)
Detailed Pin Configuration
- D0 - Data Input 0
- D1 - Data Input 1
- D2 - Data Input 2
- D3 - Data Input 3
- D4 - Data Input 4
- D5 - Data Input 5
- D6 - Data Input 6
- D7 - Data Input 7
- GND - Ground
- LE - Latch Enable
- OE - Output Enable
- Q0 - Output 0
- Q1 - Output 1
- Q2 - Output 2
- Q3 - Output 3
- Q4 - Output 4
- Q5 - Output 5
- Q6 - Output 6
- Q7 - Output 7
- VCC - Supply Voltage
Functional Features
- Octal transparent latch with 3-state outputs
- Latch enable and output enable control signals
- High-speed operation suitable for various digital applications
- Low-voltage operation for power efficiency
- 3-state outputs allow multiple devices to share a bus
Advantages and Disadvantages
Advantages: - High-speed operation enables efficient data processing - Low-voltage operation reduces power consumption - 3-state outputs facilitate bus sharing in complex systems
Disadvantages: - Limited supply voltage range (2.3V to 3.6V) - Propagation delay time may affect timing-sensitive applications
Working Principles
The MC74LCX373DWR2 is an octal transparent latch that stores 8 bits of data. It operates based on latch enable (LE) and output enable (OE) control signals. When the LE signal is high, the latch is transparent, allowing the data inputs (D0-D7) to propagate to the outputs (Q0-Q7). The OE signal controls the output state, enabling or disabling the outputs.
Detailed Application Field Plans
The MC74LCX373DWR2 is commonly used in various digital systems, including:
- Microprocessors and microcontrollers
- Data storage systems
- Communication equipment
- Industrial automation
- Automotive electronics
Detailed and Complete Alternative Models
- SN74LVC373A: Similar octal transparent latch with 3-state outputs, wider supply voltage range (1.65V to 5.5V).
- CD74HC373: Octal transparent latch with 3-state outputs, higher operating frequency (25MHz), wider supply voltage range (2V to 6V).
- 74HCT373: Octal transparent latch with 3-state outputs, compatible with TTL logic levels, wider supply voltage range (4.5V to 5.5V).
(Note: The above alternative models are just a few examples; there are several other alternatives available in the market.)
Word Count: 437
기술 솔루션에 MC74LCX373DWR2 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of MC74LCX373DWR2 in technical solutions:
Q: What is MC74LCX373DWR2? A: MC74LCX373DWR2 is a type of integrated circuit (IC) commonly used as an octal transparent latch with 3-state outputs.
Q: What is the purpose of MC74LCX373DWR2? A: The purpose of MC74LCX373DWR2 is to store and control the flow of data in digital systems, acting as a latch for eight individual bits.
Q: How does MC74LCX373DWR2 work? A: MC74LCX373DWR2 works by latching the input data when the latch enable (LE) signal is high, and then outputting the latched data when the output enable (OE) signal is also high.
Q: What is the voltage range supported by MC74LCX373DWR2? A: MC74LCX373DWR2 supports a voltage range of 2.0V to 3.6V, making it suitable for low-voltage applications.
Q: Can MC74LCX373DWR2 handle bidirectional data flow? A: No, MC74LCX373DWR2 is unidirectional and can only handle data flow from inputs to outputs.
Q: How many inputs and outputs does MC74LCX373DWR2 have? A: MC74LCX373DWR2 has eight inputs (D0-D7) and eight outputs (Q0-Q7), corresponding to each bit of data.
Q: Can MC74LCX373DWR2 be cascaded to handle more than eight bits of data? A: Yes, multiple MC74LCX373DWR2 ICs can be cascaded together to handle larger data widths.
Q: What is the maximum operating frequency of MC74LCX373DWR2? A: The maximum operating frequency of MC74LCX373DWR2 is typically around 200 MHz.
Q: Is MC74LCX373DWR2 suitable for high-speed applications? A: MC74LCX373DWR2 is not specifically designed for high-speed applications, but it can still be used in moderate-speed digital systems.
Q: Are there any specific precautions to consider when using MC74LCX373DWR2? A: It is important to ensure that the voltage levels of the inputs and outputs are within the specified range to prevent damage to the IC. Additionally, proper decoupling capacitors should be used to minimize noise and stabilize the power supply.
I hope these questions and answers help! Let me know if you have any further queries.