The MM74HCT74MX has the following specifications:
The MM74HCT74MX has a 14-pin configuration as follows:
+---+--+---+
CLR -|1 +--+ 14|- VCC
D1 -|2 13|- Q1
CLK -|3 12|- Q1'
D2 -|4 11|- Q2'
GND -|5 10|- Q2
PRN -|6 9|- CP
PRP -|7 8|- CLR'
+----------+
Advantages: - Versatile functionality with dual flip-flops - Wide supply voltage range - High-speed operation - Compact SOIC package for space-saving designs
Disadvantages: - Limited maximum operating frequency compared to some other flip-flop ICs - Requires external components for proper operation
The MM74HCT74MX operates based on positive-edge triggering. When the CLK (Clock) input receives a rising edge, the data present at the D1 and D2 inputs are transferred to the Q1 and Q2 outputs, respectively. The CLR input can be used to clear the outputs, while the PRN/PRP inputs allow for presetting the outputs to desired states.
The MM74HCT74MX is commonly used in various digital electronic systems, including:
(Note: These alternative models are provided for reference purposes and may have different pin configurations and specifications. Always refer to the respective datasheets for accurate information.)
In conclusion, the MM74HCT74MX is a versatile flip-flop
Sure! Here are 10 common questions and answers related to the application of MM74HCT74MX in technical solutions:
Question: What is MM74HCT74MX?
- Answer: MM74HCT74MX is a dual D-type flip-flop integrated circuit (IC) that can store one bit of data.
Question: What is the operating voltage range for MM74HCT74MX?
- Answer: The operating voltage range for MM74HCT74MX is typically between 4.5V and 5.5V.
Question: What is the maximum clock frequency supported by MM74HCT74MX?
- Answer: MM74HCT74MX can support clock frequencies up to 25 MHz.
Question: Can MM74HCT74MX be used as a counter?
- Answer: Yes, MM74HCT74MX can be used as a basic counter by connecting multiple flip-flops together.
Question: How many inputs and outputs does MM74HCT74MX have?
- Answer: MM74HCT74MX has two inputs (D and CLK) and two outputs (Q and Q̅).
Question: What is the power consumption of MM74HCT74MX?
- Answer: The power consumption of MM74HCT74MX is relatively low, making it suitable for battery-powered applications.
Question: Can MM74HCT74MX be used in both digital and analog circuits?
- Answer: No, MM74HCT74MX is specifically designed for digital circuits and is not suitable for analog applications.
Question: Is MM74HCT74MX compatible with other logic families?
- Answer: Yes, MM74HCT74MX is compatible with other logic families such as TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor).
Question: What is the typical propagation delay of MM74HCT74MX?
- Answer: The typical propagation delay of MM74HCT74MX is around 15 ns.
Question: Can MM74HCT74MX be used in high-speed applications?
- Answer: While MM74HCT74MX can operate at relatively high clock frequencies, it may not be suitable for extremely high-speed applications due to its limited speed compared to some other ICs.
Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.