ON Semiconductor
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
NCV7703D2G
자세히보기 데이터시트

NCV7703D2G

Product Overview

Category: Integrated Circuit (IC)

Use: The NCV7703D2G is a voltage regulator IC primarily used in automotive applications. It provides stable and regulated power supply to various electronic components in vehicles.

Characteristics: - High efficiency - Low dropout voltage - Wide input voltage range - Overcurrent and thermal protection - Short-circuit protection

Package: The NCV7703D2G is available in a small outline package (SOP) with 8 pins.

Essence: This IC is essential for maintaining the proper functioning of electronic systems in automobiles by ensuring a reliable and steady power supply.

Packaging/Quantity: The NCV7703D2G is typically sold in reels, with each reel containing a quantity of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Output Current: Up to 500mA
  • Dropout Voltage: 0.5V (typical)
  • Quiescent Current: 75µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The NCV7703D2G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (active high)
  5. FB: Feedback pin
  6. NC: No connection
  7. NC: No connection
  8. NC: No connection

Functional Features

  • High Efficiency: The NCV7703D2G offers high efficiency, minimizing power loss and maximizing energy utilization.
  • Overcurrent and Thermal Protection: It incorporates overcurrent and thermal protection mechanisms, safeguarding the IC and connected components from damage.
  • Short-Circuit Protection: The IC is equipped with short-circuit protection, preventing excessive current flow during a short circuit event.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows compatibility with various automotive systems. - Low dropout voltage ensures efficient power conversion. - Overcurrent and thermal protection enhance system reliability. - Short-circuit protection prevents damage to the IC and connected devices.

Disadvantages: - Limited output current capacity (up to 500mA) may not be suitable for high-power applications. - The small outline package (SOP) may require additional measures for heat dissipation in certain scenarios.

Working Principles

The NCV7703D2G operates as a linear voltage regulator. It regulates the input voltage to a stable and desired output voltage by dissipating excess energy as heat. The feedback pin (FB) monitors the output voltage and adjusts the internal circuitry to maintain the desired voltage level.

Detailed Application Field Plans

The NCV7703D2G finds extensive application in the automotive industry, specifically in electronic systems that require regulated power supply. Some common applications include:

  1. Engine Control Units (ECUs)
  2. Body Control Modules (BCMs)
  3. Infotainment Systems
  4. Lighting Systems
  5. Sensor Circuits
  6. Powertrain Control Modules (PCMs)

Detailed and Complete Alternative Models

  1. LM317: A popular general-purpose voltage regulator IC with adjustable output voltage.
  2. TPS7A4700: A high-performance, low-dropout voltage regulator IC suitable for various applications.
  3. LT1086: A rugged and reliable linear voltage regulator IC with adjustable output voltage and high current capability.

These alternative models offer similar functionality and can be considered based on specific requirements and design constraints.

Word count: 409

기술 솔루션에 NCV7703D2G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of NCV7703D2G in technical solutions:

  1. Q: What is NCV7703D2G? A: NCV7703D2G is a power management integrated circuit (PMIC) designed for automotive applications.

  2. Q: What are the key features of NCV7703D2G? A: Some key features of NCV7703D2G include multiple voltage regulators, overvoltage protection, undervoltage lockout, and thermal shutdown.

  3. Q: What are the typical applications of NCV7703D2G? A: NCV7703D2G is commonly used in automotive electronic systems such as body control modules, infotainment systems, and lighting control units.

  4. Q: How many voltage regulators does NCV7703D2G have? A: NCV7703D2G has four voltage regulators, including one high-side switch.

  5. Q: What is the input voltage range supported by NCV7703D2G? A: The input voltage range supported by NCV7703D2G is typically between 4.5V and 40V.

  6. Q: Does NCV7703D2G provide overvoltage protection? A: Yes, NCV7703D2G includes overvoltage protection to safeguard connected devices from excessive voltage levels.

  7. Q: Can NCV7703D2G handle high-temperature environments? A: Yes, NCV7703D2G is designed to operate reliably in high-temperature environments and includes thermal shutdown protection.

  8. Q: Is NCV7703D2G suitable for use in battery-powered applications? A: Yes, NCV7703D2G is suitable for battery-powered applications as it supports a wide input voltage range and includes undervoltage lockout.

  9. Q: Does NCV7703D2G have any built-in diagnostic features? A: Yes, NCV7703D2G includes various diagnostic features such as overcurrent detection and fault reporting.

  10. Q: Is NCV7703D2G compliant with automotive industry standards? A: Yes, NCV7703D2G is compliant with relevant automotive industry standards such as AEC-Q100 Grade 1.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.