Panasonic Electronic Components
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
UNR911BJ0L
자세히보기 데이터시트

UNR911BJ0L

Product Overview

Category

The UNR911BJ0L belongs to the category of semiconductor devices.

Use

It is used as a transistor in electronic circuits for amplification and switching purposes.

Characteristics

  • High voltage capability
  • Low saturation voltage
  • Fast switching speed

Package

The UNR911BJ0L comes in a TO-220 package.

Essence

This transistor is essential for power control and amplification in various electronic applications.

Packaging/Quantity

The UNR911BJ0L is typically packaged individually and is available in varying quantities depending on the supplier.

Specifications

  • Maximum Collector-Emitter Voltage: 400V
  • Maximum Collector Current: 10A
  • Power Dissipation: 50W
  • Transition Frequency: 2MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The UNR911BJ0L has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High voltage capability allows for use in power applications.
  • Low saturation voltage minimizes power loss during operation.
  • Fast switching speed enables quick response in switching applications.

Advantages

  • Suitable for high-power applications
  • Low power dissipation
  • Fast switching speed

Disadvantages

  • Limited maximum collector current compared to some alternative models
  • Relatively lower transition frequency

Working Principles

The UNR911BJ0L operates based on the principles of bipolar junction transistors, utilizing the flow of charge carriers to amplify or switch electronic signals.

Detailed Application Field Plans

The UNR911BJ0L is commonly used in the following applications: - Power supply units - Motor control circuits - Audio amplifiers - Switching regulators

Detailed and Complete Alternative Models

Some alternative models to the UNR911BJ0L include: - TIP31C - 2N3055 - MJ15003

In conclusion, the UNR911BJ0L is a versatile semiconductor device with high voltage capability, making it suitable for various power control and amplification applications in electronic circuits.

[Word count: 311]

기술 솔루션에 UNR911BJ0L 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is UNR911BJ0L?

    • UNR911BJ0L is a PNP transistor designed for general-purpose amplifier and low-speed switching applications.

  2. What are the key features of UNR911BJ0L?

    • The key features include a collector current of 100mA, collector-emitter voltage of 50V, and a total power dissipation of 150mW.

  3. What are the typical applications of UNR911BJ0L?

    • Typical applications include audio amplification, signal processing, and low-speed switching circuits.

  4. What is the pin configuration of UNR911BJ0L?

    • UNR911BJ0L has three pins: emitter, base, and collector, which are labeled E, B, and C respectively.

  5. What is the maximum operating temperature for UNR911BJ0L?

    • The maximum operating temperature for UNR911BJ0L is 150°C.

  6. What is the gain (hFE) of UNR911BJ0L?

    • The gain (hFE) of UNR911BJ0L typically ranges from 120 to 240.

  7. Is UNR911BJ0L suitable for high-frequency applications?

    • No, UNR911BJ0L is not suitable for high-frequency applications due to its low transition frequency.

  8. Can UNR911BJ0L be used in automotive electronics?

    • Yes, UNR911BJ0L can be used in automotive electronics for various low-power applications.

  9. What are the recommended storage conditions for UNR911BJ0L?

    • It is recommended to store UNR911BJ0L in a cool, dry place with a temperature range of -55°C to 150°C.

  10. Does UNR911BJ0L require any special handling during assembly?

    • UNR911BJ0L should be handled with standard ESD precautions during assembly to prevent damage to the device.