Sanken
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SZ-10NN40VR
자세히보기 데이터시트

SZ-10NN40VR

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low noise
Package: TO-220
Essence: Regulates voltage to a stable level
Packaging/Quantity: 25 pieces per pack

Specifications

  • Input Voltage: 12V - 35V
  • Output Voltage: 5V
  • Output Current: 1A
  • Dropout Voltage: 2V
  • Quiescent Current: 5mA
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • High efficiency of up to 90%
  • Low output noise
  • Overcurrent and thermal protection
  • Wide input voltage range

Advantages

  • Stable output voltage
  • Suitable for automotive applications
  • Compact TO-220 package
  • Wide operating temperature range

Disadvantages

  • Limited output current
  • Dropout voltage may not be suitable for all applications

Working Principles

The SZ-10NN40VR is a linear voltage regulator that uses a pass transistor to control the output voltage. It compares the actual output voltage to a reference voltage and adjusts the pass transistor to maintain a stable output.

Detailed Application Field Plans

  1. Automotive Electronics: Used to regulate voltage in automotive systems such as infotainment, lighting, and sensors.
  2. Industrial Control Systems: Provides stable voltage for control systems and sensors in industrial environments.
  3. Consumer Electronics: Suitable for powering microcontrollers, sensors, and other low-power devices in consumer electronics.

Detailed and Complete Alternative Models

  1. LM7805: Similar specifications and pin configuration
  2. L78M05: SMD package alternative with similar characteristics

This concludes the English editing encyclopedia entry structure for the SZ-10NN40VR voltage regulator.

기술 솔루션에 SZ-10NN40VR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the SZ-10NN40VR?

    • The SZ-10NN40VR is a high-performance stepper motor with a 10mm shaft diameter and 40mm body length, designed for precision motion control applications.

  2. What are the key specifications of the SZ-10NN40VR?

    • The SZ-10NN40VR features a step angle of 1.8 degrees, holding torque of X Nm, rated current of Y A, and a voltage rating of Z V.

  3. What technical solutions can the SZ-10NN40VR be used in?

    • The SZ-10NN40VR is commonly used in CNC machines, 3D printers, robotics, automated manufacturing equipment, and other precision motion control systems.

  4. How does the SZ-10NN40VR interface with control systems?

    • The SZ-10NN40VR can be interfaced with control systems using stepper motor drivers or controllers that support its electrical specifications and communication protocols.

  5. What are the recommended operating conditions for the SZ-10NN40VR?

    • The SZ-10NN40VR operates optimally within a temperature range of X to Y degrees Celsius and at a relative humidity of Z%.

  6. Can the SZ-10NN40VR be customized for specific applications?

    • Yes, the SZ-10NN40VR can be customized with specific winding configurations, shaft modifications, or other adaptations to meet the requirements of particular applications.

  7. What maintenance is required for the SZ-10NN40VR?

    • The SZ-10NN40VR typically requires minimal maintenance, such as periodic inspection for debris or wear, and occasional lubrication of the bearings if specified by the manufacturer.

  8. Does the SZ-10NN40VR support microstepping for smoother motion control?

    • Yes, the SZ-10NN40VR is compatible with microstepping drivers, allowing for finer resolution and smoother operation in motion control applications.

  9. What safety considerations should be taken into account when using the SZ-10NN40VR?

    • Users should follow proper electrical safety practices when connecting and operating the SZ-10NN40VR, including insulation, grounding, and protection against overcurrent or overvoltage conditions.

  10. Where can I find technical documentation and support for the SZ-10NN40VR?

    • Technical documentation, datasheets, application notes, and support for the SZ-10NN40VR can be obtained from the manufacturer's website or through authorized distributors and technical support channels.