EZ1085CM-3.3TRT

Product Overview

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

Package: TO-263
Essence: Linear voltage regulator
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

The specifications of EZ1085CM-3.3TRT are as follows:

Output Voltage: 3.3V
Input Voltage Range: 4.5V to 20V
Dropout Voltage: 1.5V (typical)
Maximum Output Current: 3A
Line Regulation: 0.015% (typical)
Load Regulation: 0.1% (typical)
Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The pin configuration of EZ1085CM-3.3TRT is as follows:

Pin 1: Input Voltage (VIN)
Pin 2: Ground (GND)
Pin 3: Output Voltage (VOUT)

Functional Features

High accuracy and low dropout voltage
Overcurrent and thermal protection
Fast transient response
Adjustable output voltage with external resistors

Advantages and Disadvantages

Advantages

High accuracy and stability
Wide input voltage range
Excellent load and line regulation
Thermal and overcurrent protection

Disadvantages

Higher power dissipation compared to switching regulators
Limited maximum output current

Working Principles

EZ1085CM-3.3TRT is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

EZ1085CM-3.3TRT finds applications in various electronic devices and systems, including but not limited to:

Power supplies for microcontrollers and digital circuits
Battery-powered devices requiring regulated voltage
Automotive electronics
Industrial control systems
Communication equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to EZ1085CM-3.3TRT are:

LM317T
LT1085CT
LM1117-3.3
L78M05CV
NCP1117ST33T3G

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, EZ1085CM-3.3TRT is a linear voltage regulator with high accuracy and stability. It is widely used in various electronic applications due to its excellent performance and reliability.

기술 솔루션에 EZ1085CM-3.3TRT 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of EZ1085CM-3.3TRT in technical solutions:

Q: What is the input voltage range for EZ1085CM-3.3TRT? A: The input voltage range for EZ1085CM-3.3TRT is typically between 4.5V and 20V.
Q: What is the output voltage of EZ1085CM-3.3TRT? A: The output voltage of EZ1085CM-3.3TRT is fixed at 3.3V.
Q: What is the maximum output current that EZ1085CM-3.3TRT can handle? A: EZ1085CM-3.3TRT can handle a maximum output current of 3A.
Q: Is EZ1085CM-3.3TRT suitable for low-power applications? A: No, EZ1085CM-3.3TRT is designed for medium to high-power applications due to its high output current capability.
Q: Does EZ1085CM-3.3TRT require any external components for operation? A: Yes, EZ1085CM-3.3TRT requires input and output capacitors for stability and proper operation.
Q: Can EZ1085CM-3.3TRT operate in a wide temperature range? A: Yes, EZ1085CM-3.3TRT has a wide operating temperature range of -40°C to +125°C.
Q: What is the dropout voltage of EZ1085CM-3.3TRT? A: The dropout voltage of EZ1085CM-3.3TRT is typically around 1.3V.
Q: Is EZ1085CM-3.3TRT suitable for battery-powered applications? A: Yes, EZ1085CM-3.3TRT can be used in battery-powered applications as long as the input voltage is within its specified range.
Q: Can EZ1085CM-3.3TRT handle short-circuit conditions? A: Yes, EZ1085CM-3.3TRT has built-in protection features to handle short-circuit conditions and prevent damage.
Q: What is the package type of EZ1085CM-3.3TRT? A: EZ1085CM-3.3TRT is available in a TO-263-2 (D2PAK) package, which provides good thermal dissipation capabilities.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for EZ1085CM-3.3TRT.