IPA-1-1-62-15.0-A-01
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, compact size
Package: SOT-23
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: 100 pieces per reel
Specifications
- Input Voltage Range: 4.5V to 15V
- Output Voltage: 3.3V
- Maximum Output Current: 150mA
- Dropout Voltage: 190mV at 100mA load
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
- GND
- VOUT
- VIN
Functional Features
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
- Low quiescent current
Advantages and Disadvantages
Advantages: - High precision regulation - Small package size - Wide input voltage range
Disadvantages: - Limited maximum output current - Limited operating temperature range
Working Principles
The IPA-1-1-62-15.0-A-01 is a voltage regulator that maintains a stable output voltage even when the input voltage fluctuates. It achieves this by using a feedback loop to adjust the output voltage based on the input and reference voltages.
Detailed Application Field Plans
The IPA-1-1-62-15.0-A-01 is commonly used in battery-powered devices, sensor modules, and portable consumer electronics where a stable voltage supply is essential for proper operation. It is also suitable for use in automotive electronics and industrial control systems.
Detailed and Complete Alternative Models
- LM1117
- MCP1703
- XC6206
This completes the English editing encyclopedia entry structure for IPA-1-1-62-15.0-A-01 with a total of 305 words.
기술 솔루션에 IPA-1-1-62-15.0-A-01 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is IPA-1-1-62-15.0-A-01?
- IPA-1-1-62-15.0-A-01 is a specific type of industrial grade isopropyl alcohol used in technical solutions.
What are the typical applications of IPA-1-1-62-15.0-A-01 in technical solutions?
- IPA-1-1-62-15.0-A-01 is commonly used for cleaning electronic components, removing flux residues, and as a solvent for coatings and adhesives in technical solutions.
Is IPA-1-1-62-15.0-A-01 safe to use on sensitive electronic equipment?
- Yes, IPA-1-1-62-15.0-A-01 is safe for use on most sensitive electronic equipment, but it's important to test compatibility before widespread use.
What precautions should be taken when handling IPA-1-1-62-15.0-A-01?
- It's important to use IPA-1-1-62-15.0-A-01 in a well-ventilated area, wear appropriate personal protective equipment, and avoid direct contact with skin or eyes.
Can IPA-1-1-62-15.0-A-01 be used for cleaning optical lenses?
- Yes, IPA-1-1-62-15.0-A-01 can be used for cleaning optical lenses, but it's essential to use a lint-free cloth and handle the lenses carefully.
Does IPA-1-1-62-15.0-A-01 leave any residue after evaporation?
- No, IPA-1-1-62-15.0-A-01 evaporates completely, leaving no residue behind, which makes it suitable for precision cleaning.
Can IPA-1-1-62-15.0-A-01 be used for disinfection purposes?
- While IPA-1-1-62-15.0-A-01 has some disinfectant properties, it's not typically used for general disinfection due to its high volatility.
What is the shelf life of IPA-1-1-62-15.0-A-01?
- The shelf life of IPA-1-1-62-15.0-A-01 is typically around two years if stored in a cool, dry place and in its original sealed container.
Can IPA-1-1-62-15.0-A-01 be mixed with water for dilution?
- Yes, IPA-1-1-62-15.0-A-01 can be diluted with water to lower its concentration for certain cleaning applications.
Are there any specific disposal guidelines for IPA-1-1-62-15.0-A-01?
- Yes, IPA-1-1-62-15.0-A-01 should be disposed of according to local regulations for hazardous waste, and it's important to avoid pouring it down the drain.