LELK111-1-63F-30.0-U-01-V

Product Overview

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

Input Voltage: 63V
Output Voltage: 30.0V
Package Type: TO-220
Essence: Voltage regulation
Packaging/Quantity: Typically packaged in reels or tubes, quantity varies based on supplier

Specifications

Input Voltage Range: 20V to 70V
Output Voltage Tolerance: ±2%
Maximum Output Current: 1A
Operating Temperature Range: -40°C to 125°C
Package: TO-220

Detailed Pin Configuration

Vin (Input Voltage)
GND (Ground)
Vout (Output Voltage)

Functional Features

Overvoltage Protection
Thermal Shutdown
Short Circuit Protection

Advantages and Disadvantages

Advantages

Wide input voltage range
Compact TO-220 package
Built-in protection features

Disadvantages

Limited maximum output current
Higher cost compared to basic linear regulators

Working Principles

The LELK111-1-63F-30.0-U-01-V utilizes a feedback control loop to adjust the output voltage based on the input and desired output voltage. It regulates the output by adjusting the resistance in the circuit to maintain a constant voltage.

Detailed Application Field Plans

This voltage regulator is commonly used in automotive electronics, industrial control systems, and power supply units where a stable output voltage is critical for proper operation of sensitive electronic components.

Detailed and Complete Alternative Models

LELK112-1-60F-28.0-U-01-V
LELK113-1-65F-32.0-U-01-V
LELK114-1-70F-35.0-U-01-V

Note: The alternative models listed above are similar voltage regulators with varying input and output voltage specifications.

This comprehensive entry provides detailed information about the LELK111-1-63F-30.0-U-01-V, covering its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

기술 솔루션에 LELK111-1-63F-30.0-U-01-V 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

What is the application of LELK111-1-63F-30.0-U-01-V?
- LELK111-1-63F-30.0-U-01-V is commonly used as a high-voltage power supply in various technical solutions.
What are the input voltage requirements for LELK111-1-63F-30.0-U-01-V?
- The input voltage requirement for LELK111-1-63F-30.0-U-01-V is typically within the range of 100V to 240V AC.
What is the output voltage and current rating of LELK111-1-63F-30.0-U-01-V?
- LELK111-1-63F-30.0-U-01-V provides an output voltage of 30.0V and a current rating of 1.63A.
Can LELK111-1-63F-30.0-U-01-V be used in industrial automation systems?
- Yes, LELK111-1-63F-30.0-U-01-V is suitable for use in industrial automation systems due to its high-voltage capabilities.
Is LELK111-1-63F-30.0-U-01-V suitable for powering LED lighting systems?
- Yes, LELK111-1-63F-30.0-U-01-V can be used to power LED lighting systems, providing the necessary voltage and current.
What are the typical safety features of LELK111-1-63F-30.0-U-01-V?
- LELK111-1-63F-30.0-U-01-V is equipped with overvoltage protection, short-circuit protection, and thermal protection for safe operation.
Can LELK111-1-63F-30.0-U-01-V be used in medical equipment?
- Yes, LELK111-1-63F-30.0-U-01-V can be utilized in certain types of medical equipment that require high-voltage power supplies.
What are the cooling requirements for LELK111-1-63F-30.0-U-01-V?
- LELK111-1-63F-30.0-U-01-V typically requires adequate ventilation or may include built-in cooling fans for heat dissipation.
Does LELK111-1-63F-30.0-U-01-V have remote monitoring and control capabilities?
- Some models of LELK111-1-63F-30.0-U-01-V may offer remote monitoring and control features for integration into larger systems.
Are there any specific installation guidelines for LELK111-1-63F-30.0-U-01-V?
- It is recommended to follow the manufacturer's installation guidelines and ensure proper grounding and electrical safety measures when installing LELK111-1-63F-30.0-U-01-V.