STMicroelectronics
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ST232ABN
자세히보기 데이터시트

ST232ABN

Product Overview

Category: Integrated Circuit (IC)

Use: The ST232ABN is a dual driver/receiver IC designed for RS-232 communication applications. It provides the necessary electrical interface between an asynchronous communication controller and the serial port connector.

Characteristics: - Dual driver/receiver - RS-232 voltage levels - Low power consumption - Wide operating voltage range - ESD protection - High data rate capability

Package: The ST232ABN is available in a 16-pin plastic DIP (Dual In-line Package) or SO (Small Outline) package.

Essence: This IC serves as a bridge between the asynchronous communication controller and the serial port connector, enabling reliable and efficient RS-232 communication.

Packaging/Quantity: The ST232ABN is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage Range: +4.5V to +5.5V
  • Data Rate: Up to 120 kbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Channels: 2 (dual driver/receiver)
  • Input/Output Voltage Levels: RS-232 compliant
  • ESD Protection: ±15kV (Human Body Model)

Pin Configuration

The ST232ABN features a 16-pin configuration with the following pin assignments:

  1. VCC
  2. T1OUT
  3. R1IN
  4. R1OUT
  5. T1IN
  6. GND
  7. GND
  8. T2IN
  9. R2OUT
  10. R2IN
  11. T2OUT
  12. C1-
  13. C1+
  14. C2-
  15. C2+
  16. VCC

Functional Features

  • Dual driver/receiver allows simultaneous transmission and reception of data.
  • RS-232 voltage levels ensure compatibility with standard serial port connectors.
  • Low power consumption for energy-efficient operation.
  • Wide operating voltage range enables flexibility in various applications.
  • ESD protection safeguards the IC from electrostatic discharges.
  • High data rate capability supports fast and reliable communication.

Advantages and Disadvantages

Advantages: - Simultaneous transmission and reception of data - Reliable RS-232 voltage level conversion - Low power consumption - Wide operating voltage range - ESD protection - High data rate capability

Disadvantages: - Limited to RS-232 communication applications - Requires external asynchronous communication controller

Working Principles

The ST232ABN operates by converting the electrical signals from an asynchronous communication controller into RS-232 voltage levels suitable for transmission over a serial port connector. It uses internal circuitry to drive and receive data, ensuring accurate and efficient communication between devices.

Detailed Application Field Plans

The ST232ABN is commonly used in various applications that require RS-232 communication, such as: - Personal computers - Embedded systems - Industrial automation - Telecommunications equipment - Medical devices

Alternative Models

For alternative options, the following models can be considered: - MAX232: Similar functionality and pin configuration - ADM3202: Enhanced features and higher data rate capability - LTC1380: Low power consumption and extended temperature range

These alternative models provide similar or improved performance compared to the ST232ABN, catering to different application requirements.

In conclusion, the ST232ABN is a versatile dual driver/receiver IC designed for RS-232 communication applications. With its reliable performance, low power consumption, and wide operating voltage range, it serves as an essential component in various industries.

기술 솔루션에 ST232ABN 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ST232ABN in technical solutions:

  1. Q: What is ST232ABN? A: ST232ABN is a dual driver/receiver IC (integrated circuit) commonly used for converting TTL/CMOS logic levels to RS-232 voltage levels.

  2. Q: What are the key features of ST232ABN? A: The key features of ST232ABN include low power consumption, wide operating voltage range, high data rate capability, and compatibility with various microcontrollers and communication devices.

  3. Q: How does ST232ABN convert logic levels to RS-232 voltage levels? A: ST232ABN uses charge pump technology to generate positive and negative voltages required for RS-232 communication, allowing it to interface between different logic level standards.

  4. Q: Can ST232ABN be used for bidirectional communication? A: No, ST232ABN is a unidirectional device. It can either transmit or receive data but not both simultaneously. For bidirectional communication, two ST232ABN ICs are typically used.

  5. Q: What is the maximum data rate supported by ST232ABN? A: ST232ABN supports data rates up to 120 kbps, making it suitable for many standard serial communication applications.

  6. Q: Is ST232ABN compatible with 3.3V logic levels? A: Yes, ST232ABN is designed to work with both 5V and 3.3V logic levels, making it versatile for interfacing with different microcontrollers and devices.

  7. Q: Can ST232ABN be used in industrial environments? A: Yes, ST232ABN is designed to operate reliably in industrial environments, with features like ESD protection and wide temperature range (-40°C to +85°C).

  8. Q: What is the power supply voltage range for ST232ABN? A: The power supply voltage range for ST232ABN is typically between 4.5V and 5.5V.

  9. Q: Can ST232ABN be used in battery-powered applications? A: Yes, ST232ABN's low power consumption makes it suitable for battery-powered applications where power efficiency is crucial.

  10. Q: Are there any application notes or reference designs available for ST232ABN? A: Yes, STMicroelectronics provides application notes and reference designs that can help users understand and implement ST232ABN in their technical solutions.

Please note that these answers are general and may vary depending on specific requirements and use cases.