STMicroelectronics
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TL431CZ-AP
자세히보기 데이터시트

TL431CZ-AP

Product Overview

Category

The TL431CZ-AP belongs to the category of voltage references and shunt regulators.

Use

It is commonly used as a precision reference voltage source in various electronic circuits.

Characteristics

  • Adjustable output voltage
  • High accuracy and stability
  • Low temperature coefficient
  • Low dynamic impedance
  • Wide operating temperature range

Package

The TL431CZ-AP is available in a TO-92 package, which is a small plastic package with three leads.

Essence

The essence of TL431CZ-AP lies in its ability to provide a stable and precise reference voltage for regulating other circuit components.

Packaging/Quantity

The TL431CZ-AP is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.

Specifications

  • Reference Voltage: 2.5V to 36V
  • Operating Current Range: 1mA to 100mA
  • Temperature Range: -40°C to +85°C
  • Output Voltage Tolerance: ±0.5%
  • Dynamic Output Impedance: 0.22Ω

Detailed Pin Configuration

The TL431CZ-AP has three pins:

  1. Anode (A): Connected to the positive supply voltage.
  2. Cathode (K): Connected to the load or circuit ground.
  3. Reference (R): Provides the regulated output voltage.

Functional Features

  • Programmable output voltage
  • High precision and stability over temperature and time
  • Low power consumption
  • Fast response time
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Versatile and widely used in various applications
  • Easy to use and implement
  • Provides accurate and stable reference voltage
  • Cost-effective solution

Disadvantages

  • Limited output current capability
  • Requires an external resistor for voltage programming
  • Sensitivity to noise and fluctuations in the input voltage

Working Principles

The TL431CZ-AP operates based on the principle of a shunt regulator. It compares the reference voltage at the Reference (R) pin with the voltage across a voltage divider connected to the Anode (A) and Cathode (K) pins. By adjusting the voltage at the Reference (R) pin, the output voltage can be regulated.

Detailed Application Field Plans

The TL431CZ-AP finds applications in various fields, including:

  1. Power supply regulation
  2. Battery charging circuits
  3. Voltage monitoring and protection circuits
  4. Switching power supplies
  5. Audio amplifiers
  6. LED drivers
  7. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be used as substitutes for TL431CZ-AP include:

  1. LM4040
  2. LT1009
  3. REF02
  4. MAX6126

These alternatives offer similar functionality and performance characteristics, providing options for different design requirements.

In conclusion, the TL431CZ-AP is a versatile voltage reference and shunt regulator widely used in various electronic circuits. Its adjustable output voltage, high accuracy, and stability make it suitable for a range of applications. However, it has limitations in terms of output current capability and sensitivity to noise. Engineers can consider alternative models depending on their specific design needs.

기술 솔루션에 TL431CZ-AP 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of TL431CZ-AP:

  1. Q: What is TL431CZ-AP? A: TL431CZ-AP is a programmable precision voltage reference integrated circuit (IC) commonly used in technical solutions.

  2. Q: What are the typical applications of TL431CZ-AP? A: TL431CZ-AP is widely used in voltage regulation, voltage monitoring, feedback control circuits, and precision measurement applications.

  3. Q: How does TL431CZ-AP work? A: TL431CZ-AP operates as a shunt regulator, comparing the reference voltage with an external voltage divider network to regulate the output voltage.

  4. Q: What is the voltage range of TL431CZ-AP? A: The voltage range of TL431CZ-AP is typically from 2.5V to 36V.

  5. Q: Can TL431CZ-AP be used as a voltage regulator? A: Yes, TL431CZ-AP can be used as a voltage regulator by connecting it in a feedback loop with an external resistor divider network.

  6. Q: How accurate is TL431CZ-AP? A: TL431CZ-AP has a high level of accuracy, typically with a tolerance of ±1%.

  7. Q: Can TL431CZ-AP be used for overvoltage protection? A: Yes, TL431CZ-AP can be used for overvoltage protection by configuring it as a comparator to monitor the input voltage and trigger a shutdown when it exceeds a certain threshold.

  8. Q: Is TL431CZ-AP suitable for low-power applications? A: Yes, TL431CZ-AP is suitable for low-power applications as it has a low quiescent current and can operate with low power supply voltages.

  9. Q: Can TL431CZ-AP be used in automotive applications? A: Yes, TL431CZ-AP is commonly used in automotive applications such as battery management systems, voltage regulators, and lighting control circuits.

  10. Q: Are there any precautions to consider when using TL431CZ-AP? A: Yes, some precautions include ensuring proper heat dissipation, avoiding excessive input voltage, and providing adequate decoupling capacitors for stable operation.

Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for detailed information.