STMicroelectronics
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
VNQ830-E
자세히보기 데이터시트

VNQ830-E

Product Overview

Category: Integrated Circuit (IC)

Use: The VNQ830-E is a high-side driver IC designed for automotive applications. It is specifically used for driving resistive, inductive, and capacitive loads in harsh environments.

Characteristics: - High voltage capability - Low standby current consumption - Overtemperature protection - Short-circuit protection - ESD protection

Package: The VNQ830-E is available in a PowerSSO-24 package, which provides excellent thermal performance and electrical isolation.

Essence: The essence of the VNQ830-E lies in its ability to efficiently control and drive various loads in automotive systems, ensuring reliable and safe operation.

Packaging/Quantity: The VNQ830-E is typically sold in reels containing 250 units per reel.

Specifications

  • Supply Voltage Range: 5.5V to 36V
  • Output Current: Up to 10A
  • Standby Current: 7µA (typical)
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The VNQ830-E features a PowerSSO-24 package with the following pin configuration:

  1. IN1: Input control signal 1
  2. IN2: Input control signal 2
  3. IN3: Input control signal 3
  4. GND: Ground
  5. OUT1: Output 1
  6. OUT2: Output 2
  7. OUT3: Output 3
  8. VCC: Supply voltage
  9. NC: No connection
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection
  17. NC: No connection
  18. NC: No connection
  19. NC: No connection
  20. NC: No connection
  21. NC: No connection
  22. NC: No connection
  23. NC: No connection
  24. NC: No connection

Functional Features

  • High-side driver with integrated power MOSFETs
  • Three independent channels for driving loads
  • Built-in protection features such as overtemperature and short-circuit protection
  • ESD protection for enhanced reliability
  • Low standby current consumption for energy efficiency

Advantages and Disadvantages

Advantages: - High voltage capability allows for versatile load driving - Robust protection features ensure safe operation in harsh environments - Low standby current consumption minimizes power wastage - Compact PowerSSO-24 package provides excellent thermal performance

Disadvantages: - Limited number of output channels (three channels)

Working Principles

The VNQ830-E operates by receiving input control signals (IN1, IN2, IN3) to activate the corresponding output channels (OUT1, OUT2, OUT3). These output channels are connected to the load, allowing the IC to drive resistive, inductive, and capacitive loads. The built-in protection features safeguard the IC and the load from overtemperature conditions and short circuits.

Detailed Application Field Plans

The VNQ830-E is widely used in various automotive applications, including but not limited to: - Automotive lighting systems - Motor control for windshield wipers - HVAC (Heating, Ventilation, and Air Conditioning) systems - Power distribution modules - Electric power steering systems

Detailed and Complete Alternative Models

  • VNQ820-E: Similar high-side driver IC with two output channels
  • VNQ840-E: Similar high-side driver IC with four output channels
  • VNQ850-E: Similar high-side driver IC with five output channels

These alternative models offer different channel configurations to suit specific application requirements.

Word count: 438 words

기술 솔루션에 VNQ830-E 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of VNQ830-E in technical solutions:

  1. Question: What is VNQ830-E?
    Answer: VNQ830-E is a high-side driver IC (Integrated Circuit) designed for automotive applications.

  2. Question: What is the maximum voltage rating of VNQ830-E?
    Answer: The maximum voltage rating of VNQ830-E is typically 36V.

  3. Question: What is the maximum current rating of VNQ830-E?
    Answer: The maximum current rating of VNQ830-E is typically 5A.

  4. Question: Can VNQ830-E be used for driving resistive loads?
    Answer: Yes, VNQ830-E can be used for driving resistive loads such as heaters or solenoids.

  5. Question: Is VNQ830-E suitable for driving inductive loads?
    Answer: Yes, VNQ830-E has built-in protection features like overvoltage and overcurrent protection, making it suitable for driving inductive loads like motors or relays.

  6. Question: Does VNQ830-E require an external power supply?
    Answer: Yes, VNQ830-E requires an external power supply for its operation.

  7. Question: What is the operating temperature range of VNQ830-E?
    Answer: The operating temperature range of VNQ830-E is typically -40°C to +150°C.

  8. Question: Can VNQ830-E be used in automotive applications?
    Answer: Yes, VNQ830-E is specifically designed for automotive applications and meets the required automotive standards.

  9. Question: Does VNQ830-E have short-circuit protection?
    Answer: Yes, VNQ830-E has built-in short-circuit protection to prevent damage in case of a short circuit.

  10. Question: What is the package type of VNQ830-E?
    Answer: VNQ830-E is available in a PowerSSO-36 package, which provides good thermal performance and ease of mounting.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.