Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SN64BCT25245DWR
자세히보기 데이터시트

SN64BCT25245DWR

Product Overview

Category

The SN64BCT25245DWR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal transmission and level shifting in various electronic devices.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Robust design for reliable performance

Package

The SN64BCT25245DWR is available in a small outline package (SOIC) with 24 pins.

Essence

This IC serves as a bidirectional voltage-level translator, allowing seamless communication between devices operating at different voltage levels.

Packaging/Quantity

The SN64BCT25245DWR is typically packaged in reels or tubes, with each containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 2.0V to 6.0V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Data Rate: 100 Mbps

Detailed Pin Configuration

The SN64BCT25245DWR has a total of 24 pins, which are assigned specific functions. The pin configuration is as follows:

  1. A1
  2. B1
  3. GND
  4. B2
  5. A2
  6. OE#
  7. DIR
  8. VCC
  9. B3
  10. A3
  11. B4
  12. A4
  13. B5
  14. A5
  15. B6
  16. A6
  17. B7
  18. A7
  19. B8
  20. A8
  21. B9
  22. A9
  23. B10
  24. A10

Functional Features

  • Bidirectional voltage-level translation
  • Automatic direction control (DIR pin)
  • Output enable control (OE# pin)
  • High-speed data transmission
  • Robust ESD protection

Advantages and Disadvantages

Advantages

  • Wide operating voltage range allows compatibility with various devices
  • High-speed operation enables efficient data transfer
  • Low power consumption for energy-efficient applications
  • Robust design ensures reliable performance even in challenging environments

Disadvantages

  • Limited maximum data rate compared to some alternative models
  • May require additional external components for specific applications

Working Principles

The SN64BCT25245DWR operates based on the principles of voltage-level translation. It receives input signals from one voltage domain and translates them to the corresponding voltage level of another domain. The automatic direction control (DIR) pin determines the direction of translation, while the output enable control (OE#) pin enables or disables the output.

Detailed Application Field Plans

The SN64BCT25245DWR finds applications in various electronic systems, including but not limited to: - Communication devices - Industrial automation - Automotive electronics - Consumer electronics - Medical equipment

Detailed and Complete Alternative Models

  1. SN74LVC245A
  2. TXB0108PWR
  3. PCA9306DCUR
  4. 74LVCH162244ADGGR
  5. SN74AVC4T245PWRE4

These alternative models offer similar functionality and can be considered as substitutes for the SN64BCT25245DWR in different applications.

Note: The above content is a general structure for an encyclopedia entry and may require further elaboration and refinement based on specific requirements.

기술 솔루션에 SN64BCT25245DWR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SN64BCT25245DWR in technical solutions:

  1. Q: What is SN64BCT25245DWR? A: SN64BCT25245DWR is a high-speed, octal bidirectional transceiver with 3-state outputs. It is commonly used for level shifting and signal buffering in various technical applications.

  2. Q: What is the voltage range supported by SN64BCT25245DWR? A: SN64BCT25245DWR supports a wide voltage range from 4.5V to 5.5V.

  3. Q: How many bidirectional channels does SN64BCT25245DWR have? A: SN64BCT25245DWR has 8 bidirectional channels, allowing for simultaneous data transmission in both directions.

  4. Q: What is the maximum data transfer rate supported by SN64BCT25245DWR? A: SN64BCT25245DWR supports a maximum data transfer rate of 100 Mbps, making it suitable for high-speed applications.

  5. Q: Can SN64BCT25245DWR handle different logic levels on its input and output sides? A: Yes, SN64BCT25245DWR can handle different logic levels as it provides level shifting capability between input and output sides.

  6. Q: Does SN64BCT25245DWR have built-in protection features? A: Yes, SN64BCT25245DWR has built-in ESD (Electrostatic Discharge) protection, which helps safeguard against electrostatic damage.

  7. Q: Can SN64BCT25245DWR be used in both parallel and serial communication systems? A: Yes, SN64BCT25245DWR can be used in both parallel and serial communication systems, depending on the application requirements.

  8. Q: What is the power supply voltage required for SN64BCT25245DWR? A: SN64BCT25245DWR requires a single power supply voltage of 5V.

  9. Q: Is SN64BCT25245DWR compatible with other standard logic families? A: Yes, SN64BCT25245DWR is compatible with TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) logic families.

  10. Q: Can SN64BCT25245DWR be used in automotive applications? A: Yes, SN64BCT25245DWR is suitable for automotive applications as it meets the necessary standards for automotive electronics.

Please note that these answers are general and may vary based on specific datasheet information and application requirements.