SN74AC241NSR

Product Overview

• Category: Integrated Circuit
• Use: Buffer/Line Driver
• Characteristics: High-Speed, Low-Power, Non-Inverting
• Package: SOIC (Small Outline Integrated Circuit)
• Essence: Logic Gate
• Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

• Supply Voltage Range: 2V to 6V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Maximum Operating Frequency: 50 MHz
• Number of Inputs: 8
• Number of Outputs: 8
• Propagation Delay Time: 5.8 ns (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

1. GND (Ground)
2. A1 (Input 1)
3. A2 (Input 2)
4. A3 (Input 3)
5. A4 (Input 4)
6. A5 (Input 5)
7. A6 (Input 6)
8. A7 (Input 7)
9. A8 (Input 8)
10. OE (Output Enable)
11. Y1 (Output 1)
12. Y2 (Output 2)
13. Y3 (Output 3)
14. Y4 (Output 4)
15. Y5 (Output 5)
16. Y6 (Output 6)
17. Y7 (Output 7)
18. Y8 (Output 8)
19. VCC (Supply Voltage)

Functional Features

• Non-inverting buffer with 3-state outputs
• High-speed operation suitable for various applications
• Low power consumption
• Wide supply voltage range allows compatibility with different systems
• 3-state output allows multiple devices to share a common bus

Advantages and Disadvantages

Advantages: - High-speed operation - Low power consumption - Wide supply voltage range - 3-state output for bus sharing

Disadvantages: - Limited number of inputs and outputs (8 each) - Propagation delay may affect timing-sensitive applications

Working Principles

The SN74AC241NSR is a non-inverting buffer with 3-state outputs. It operates by amplifying the input signals and providing a high-speed, low-power output. The 3-state output allows the device to be effectively disconnected from the bus when not in use, preventing any interference or conflicts.

Detailed Application Field Plans

The SN74AC241NSR is commonly used in various digital systems where buffering and line driving are required. Some specific application fields include:

1. Microprocessor Systems: The IC can be used to interface between the microprocessor and other peripheral devices, ensuring proper signal levels and driving capability.

2. Data Communication: It can be employed in data communication systems to amplify and drive signals along transmission lines, improving signal integrity and reducing noise.

3. Memory Systems: The IC can be utilized in memory systems to buffer address and data lines, enabling efficient communication between the memory modules and the controller.

4. Industrial Automation: It finds applications in industrial automation systems, where it helps in buffering and driving control signals for various actuators and sensors.

Detailed and Complete Alternative Models

1. SN74ACT241: Similar functionality but with faster propagation delay and higher operating frequency.
2. SN74HC241: Compatible with CMOS and TTL logic levels, suitable for mixed-voltage systems.
3. SN74LVC241A: Low-voltage version with reduced power consumption and wider supply voltage range.

These alternative models offer similar functionality to the SN74AC241NSR but may have different characteristics and specifications that cater to specific requirements.

Word count: 440 words