SN74ACT533NSRE4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Logic Level Translator
• Characteristics: High-speed, low-power consumption
• Package: Surface Mount Technology (SMT)
• Essence: Translates logic levels between different voltage domains
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 2 V to 6 V
• Input Voltage Range: 0 V to VCC
• Output Voltage Range: 0 V to VCC
• Operating Temperature Range: -40°C to +85°C
• Logic Family: ACT
• Number of Pins: 20
• Pin Pitch: 0.65 mm

Detailed Pin Configuration

1. GND (Ground)
2. A0 (Input A0)
3. A1 (Input A1)
4. A2 (Input A2)
5. A3 (Input A3)
6. A4 (Input A4)
7. A5 (Input A5)
8. OE (Output Enable)
9. B0 (Input B0)
10. B1 (Input B1)
11. B2 (Input B2)
12. B3 (Input B3)
13. B4 (Input B4)
14. B5 (Input B5)
15. Y0 (Output Y0)
16. Y1 (Output Y1)
17. Y2 (Output Y2)
18. Y3 (Output Y3)
19. Y4 (Output Y4)
20. Y5 (Output Y5)

Functional Features

• Bi-directional level translation between two voltage domains
• Supports voltage translation from 2 V to 6 V
• High-speed operation with minimal propagation delay
• Low power consumption for energy-efficient applications
• Output enable pin for easy control of translation direction

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems - High-speed operation enables efficient data transfer - Low power consumption prolongs battery life in portable devices

Disadvantages: - Limited number of translation channels (6 in this case) - Not suitable for voltage translation outside the specified range

Working Principles

The SN74ACT533NSRE4 is a logic level translator that facilitates communication between two voltage domains. It operates by receiving input signals from one domain and translating them to the corresponding voltage levels in the other domain. The device utilizes a combination of MOSFETs and CMOS technology to achieve fast and efficient level translation.

Detailed Application Field Plans

1. Microcontroller interfacing with different voltage peripherals
2. Communication between digital systems operating at different voltage levels
3. Level shifting in mixed-signal circuits
4. Interface conversion in industrial automation systems
5. Voltage translation in battery-powered devices

Detailed and Complete Alternative Models

1. SN74LVC4245APWR - 8-bit dual-supply bus transceiver
2. SN74HCT125N - Quad buffer/line driver with 3-state outputs
3. SN74LVCH245APW - Octal bus transceiver with 3-state outputs
4. SN74LVC1G07DCKR - Single buffer/driver with open-drain output
5. SN74AHC1G08DBVR - Single 2-input AND gate

(Note: These alternative models are provided as examples and may not be direct replacements for SN74ACT533NSRE4. Please refer to the respective datasheets for detailed specifications.)

This entry provides an overview of the SN74ACT533NSRE4 logic level translator, including its product category, use, characteristics, package, and quantity. The specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models are also discussed.