The SN74ACT573PWRE4 has a total of 20 pins. The pin configuration is as follows:
The SN74ACT573PWRE4 is an octal transparent latch that stores data based on the input signals applied to its data inputs (D0-D7). The latch enable (LE) input controls when the data is latched, while the output enable (OE) input determines whether the outputs (Q0-Q7) are active or in a high-impedance state.
When the LE input is high, the latch is enabled, and the data inputs are transferred to the outputs. The OE input, when low, enables the outputs, allowing the stored data to be read by other devices. When the OE input is high, the outputs are in a high-impedance state, isolating them from the rest of the circuit.
The SN74ACT573PWRE4 is commonly used in various digital circuit applications, including:
These alternative models offer similar functionality and can be considered as alternatives to the SN74ACT573PWRE4 depending on specific application requirements.
(Note: The word count of this response is 408 words)
Sure! Here are 10 common questions and answers related to the application of SN74ACT573PWRE4:
Q: What is SN74ACT573PWRE4? A: SN74ACT573PWRE4 is a octal transparent D-type latch with 3-state outputs, commonly used in digital systems.
Q: What is the operating voltage range for SN74ACT573PWRE4? A: The operating voltage range for SN74ACT573PWRE4 is typically between 4.5V and 5.5V.
Q: What is the maximum output current that SN74ACT573PWRE4 can drive? A: SN74ACT573PWRE4 can drive up to 24mA of output current per channel.
Q: Can SN74ACT573PWRE4 be used in both parallel and serial data transfer applications? A: Yes, SN74ACT573PWRE4 can be used in both parallel and serial data transfer applications.
Q: Does SN74ACT573PWRE4 have any built-in protection features? A: Yes, SN74ACT573PWRE4 has built-in ESD (Electrostatic Discharge) protection on all inputs and outputs.
Q: What is the typical propagation delay of SN74ACT573PWRE4? A: The typical propagation delay of SN74ACT573PWRE4 is around 6ns.
Q: Can SN74ACT573PWRE4 be used in high-speed applications? A: Yes, SN74ACT573PWRE4 is designed for high-speed operation and can be used in such applications.
Q: How many input and output pins does SN74ACT573PWRE4 have? A: SN74ACT573PWRE4 has 8 input pins and 8 output pins.
Q: Can SN74ACT573PWRE4 be cascaded to increase the number of latches? A: Yes, SN74ACT573PWRE4 can be cascaded to increase the number of latches in a system.
Q: What is the package type for SN74ACT573PWRE4? A: SN74ACT573PWRE4 is available in a TSSOP (Thin Shrink Small Outline Package) package type.
Please note that these answers are general and may vary depending on specific datasheet specifications.