Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SN74AUC2G240DCTR
자세히보기 데이터시트

SN74AUC2G240DCTR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Gate
  • Characteristics: Dual Inverting Buffer/Driver
  • Package: SOT-23-6
  • Essence: High-speed CMOS technology
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Supply Voltage Range: 0.8V to 3.6V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 100MHz
  • Propagation Delay: 1.9ns (typical)
  • Output Drive Capability: ±24mA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The SN74AUC2G240DCTR has a total of 6 pins arranged as follows:

___________ Pin 1 -->| | Pin 2 -->| | Pin 3 -->| | Pin 4 -->| | Pin 5 -->| | Pin 6 -->|___________|

  • Pin 1: Input A
  • Pin 2: Output Y
  • Pin 3: GND (Ground)
  • Pin 4: Input B
  • Pin 5: Output Y
  • Pin 6: VCC (Power Supply)

Functional Features

  • Dual inverting buffer/driver with high-speed performance
  • Compatible with various logic families due to wide supply voltage range
  • Low power consumption
  • Schmitt-trigger input allows for noise immunity
  • High output drive capability for driving capacitive loads

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transmission - Wide supply voltage range allows compatibility with different systems - Low power consumption reduces energy usage - Schmitt-trigger input enhances noise immunity - High output drive capability enables driving of capacitive loads

Disadvantages: - Limited number of inputs and outputs - Sensitive to electrostatic discharge (ESD) - Relatively small package size may require careful handling during assembly

Working Principles

The SN74AUC2G240DCTR is a dual inverting buffer/driver that operates using high-speed CMOS technology. It accepts two input signals, A and B, and provides inverted outputs, Y and Y. The device is designed to operate within a wide supply voltage range, making it compatible with various logic families.

The inputs feature Schmitt-trigger characteristics, which provide noise immunity by ensuring a clean transition between logic levels even in the presence of signal noise. The outputs have a high drive capability, allowing them to drive capacitive loads efficiently.

Detailed Application Field Plans

The SN74AUC2G240DCTR can be used in various applications, including:

  1. Communication Systems: The high-speed operation and low power consumption make it suitable for data transmission in communication systems.
  2. Industrial Control Systems: The wide supply voltage range allows integration into different industrial control systems.
  3. Consumer Electronics: The compact package size and compatibility with different logic families make it ideal for use in consumer electronic devices.
  4. Automotive Electronics: The device's operating temperature range (-40°C to 85°C) makes it suitable for automotive applications.

Detailed and Complete Alternative Models

  1. SN74AUC2G04DCTR: Dual Inverter
  2. SN74AUC2G08DCTR: Dual 2-Input AND Gate
  3. SN74AUC2G125DCTR: Dual Bus Buffer Gate with 3-State Outputs
  4. SN74AUC2G157DCTR: Dual 2-Line to 1-Line Data Selector/Multiplexer

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 529 words

기술 솔루션에 SN74AUC2G240DCTR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SN74AUC2G240DCTR in technical solutions:

  1. Q: What is SN74AUC2G240DCTR? A: SN74AUC2G240DCTR is a dual buffer and line driver IC (integrated circuit) that can be used for signal buffering and level shifting in various electronic applications.

  2. Q: What is the operating voltage range of SN74AUC2G240DCTR? A: The operating voltage range of SN74AUC2G240DCTR is typically between 0.8V and 3.6V.

  3. Q: Can SN74AUC2G240DCTR handle bidirectional signals? A: Yes, SN74AUC2G240DCTR supports bidirectional signals, making it suitable for applications where data needs to be transmitted in both directions.

  4. Q: What is the maximum output current of SN74AUC2G240DCTR? A: The maximum output current of SN74AUC2G240DCTR is typically around 24mA.

  5. Q: Is SN74AUC2G240DCTR compatible with different logic families? A: Yes, SN74AUC2G240DCTR is designed to be compatible with various logic families, including CMOS, TTL, and LVCMOS.

  6. Q: Can SN74AUC2G240DCTR be used in high-speed applications? A: Yes, SN74AUC2G240DCTR is capable of operating at high speeds, making it suitable for applications that require fast signal propagation.

  7. Q: Does SN74AUC2G240DCTR have built-in ESD protection? A: Yes, SN74AUC2G240DCTR is equipped with built-in ESD (electrostatic discharge) protection, which helps safeguard the IC from damage during handling or operation.

  8. Q: What is the package type of SN74AUC2G240DCTR? A: SN74AUC2G240DCTR is available in a small SOT-23-6 package, which is compact and suitable for space-constrained designs.

  9. Q: Can SN74AUC2G240DCTR be used in battery-powered applications? A: Yes, SN74AUC2G240DCTR has a low power consumption and can operate at lower supply voltages, making it suitable for battery-powered applications.

  10. Q: Where can I find more information about the application of SN74AUC2G240DCTR? A: You can refer to the datasheet provided by the manufacturer, Texas Instruments, for detailed information on the application and usage of SN74AUC2G240DCTR.