Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SN74CBT16292DL
자세히보기 데이터시트

SN74CBT16292DL

Product Overview

  • Category: Integrated Circuit
  • Use: Digital Multiplexer/Demultiplexer
  • Characteristics: High-speed, low-power consumption
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: 16-bit bus switch with 4-bit enable
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Number of Channels: 16
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Supply Voltage Range: 2V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • On-state Resistance: 5Ω (typical)
  • Bandwidth: 400MHz (typical)

Detailed Pin Configuration

The SN74CBT16292DL has a total of 56 pins. The pin configuration is as follows:

  1. OE1 (Output Enable 1)
  2. I/O1A (Input/Output 1A)
  3. I/O1B (Input/Output 1B)
  4. GND (Ground)
  5. I/O2A (Input/Output 2A)
  6. I/O2B (Input/Output 2B)
  7. VCC (Supply Voltage)
  8. OE2 (Output Enable 2)
  9. I/O3A (Input/Output 3A)
  10. I/O3B (Input/Output 3B)
  11. I/O4A (Input/Output 4A)
  12. I/O4B (Input/Output 4B)
  13. I/O5A (Input/Output 5A)
  14. I/O5B (Input/Output 5B)
  15. I/O6A (Input/Output 6A)
  16. I/O6B (Input/Output 6B)
  17. I/O7A (Input/Output 7A)
  18. I/O7B (Input/Output 7B)
  19. I/O8A (Input/Output 8A)
  20. I/O8B (Input/Output 8B)
  21. I/O9A (Input/Output 9A)
  22. I/O9B (Input/Output 9B)
  23. I/O10A (Input/Output 10A)
  24. I/O10B (Input/Output 10B)
  25. I/O11A (Input/Output 11A)
  26. I/O11B (Input/Output 11B)
  27. I/O12A (Input/Output 12A)
  28. I/O12B (Input/Output 12B)
  29. I/O13A (Input/Output 13A)
  30. I/O13B (Input/Output 13B)
  31. I/O14A (Input/Output 14A)
  32. I/O14B (Input/Output 14B)
  33. I/O15A (Input/Output 15A)
  34. I/O15B (Input/Output 15B)
  35. I/O16A (Input/Output 16A)
  36. I/O16B (Input/Output 16B)
  37. GND (Ground)
  38. I/O1Y (Input/Output 1Y)
  39. I/O2Y (Input/Output 2Y)
  40. VCC (Supply Voltage)
  41. I/O3Y (Input/Output 3Y)
  42. I/O4Y (Input/Output 4Y)
  43. I/O5Y (Input/Output 5Y)
  44. I/O6Y (Input/Output 6Y)
  45. I/O7Y (Input/Output 7Y)
  46. I/O8Y (Input/Output 8Y)
  47. I/O9Y (Input/Output 9Y)
  48. I/O10Y (Input/Output 10Y)
  49. I/O11Y (Input/Output 11Y)
  50. I/O12Y (Input/Output 12Y)
  51. I/O13Y (Input/Output 13Y)
  52. I/O14Y (Input/Output 14Y)
  53. I/O15Y (Input/Output 15Y)
  54. I/O16Y (Input/Output 16Y)
  55. GND (Ground)
  56. VCC (Supply Voltage)

Functional Features

  • High-speed switching capability
  • Low power consumption
  • Wide operating voltage range
  • Bidirectional data flow
  • 4-bit enable control for channel selection

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data transfer. - Low power consumption helps

기술 솔루션에 SN74CBT16292DL 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SN74CBT16292DL in technical solutions:

  1. Q: What is SN74CBT16292DL? A: SN74CBT16292DL is a 16-bit bus switch with 3-state outputs, designed for high-speed digital applications.

  2. Q: What is the purpose of SN74CBT16292DL? A: SN74CBT16292DL is used to control the flow of data between multiple sources and destinations in a digital system.

  3. Q: What is the maximum operating frequency of SN74CBT16292DL? A: The maximum operating frequency of SN74CBT16292DL is typically around 200 MHz.

  4. Q: How many channels does SN74CBT16292DL have? A: SN74CBT16292DL has 16 bidirectional channels, allowing data to be transmitted in both directions.

  5. Q: What is the voltage range supported by SN74CBT16292DL? A: SN74CBT16292DL supports a voltage range of 1.65V to 3.6V, making it compatible with various logic families.

  6. Q: Can SN74CBT16292DL handle level translation between different voltage domains? A: Yes, SN74CBT16292DL can be used for level translation between different voltage domains within its specified range.

  7. Q: Does SN74CBT16292DL have built-in ESD protection? A: Yes, SN74CBT16292DL incorporates built-in ESD protection, ensuring robustness against electrostatic discharge events.

  8. Q: What is the power supply requirement for SN74CBT16292DL? A: SN74CBT16292DL requires a single power supply voltage of 1.65V to 3.6V for proper operation.

  9. Q: Can SN74CBT16292DL be used in hot-swapping applications? A: Yes, SN74CBT16292DL supports hot-swapping, allowing it to be inserted or removed from a live system without causing damage.

  10. Q: Are there any specific layout considerations for using SN74CBT16292DL? A: Yes, it is recommended to follow the layout guidelines provided in the datasheet to minimize noise and ensure optimal performance.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always advisable to refer to the datasheet and consult with technical experts for accurate information.