Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SN74HC240DWR
자세히보기 데이터시트

SN74HC240DWR

Product Overview

Category

SN74HC240DWR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a buffer or line driver in various electronic applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger inputs for noise immunity
  • 3-state outputs for bus-oriented applications

Package

SN74HC240DWR is available in a small outline package (SOIC) with a width of 7.5mm.

Essence

The essence of SN74HC240DWR lies in its ability to provide efficient signal buffering and driving capabilities, ensuring reliable data transmission in electronic systems.

Packaging/Quantity

SN74HC240DWR is typically packaged in reels, containing 2500 units per reel.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 14ns
  • Maximum Quiescent Current: 4μA

Detailed Pin Configuration

  1. A1 - Input A1
  2. Y1 - Output Y1
  3. A2 - Input A2
  4. Y2 - Output Y2
  5. GND - Ground
  6. A3 - Input A3
  7. Y3 - Output Y3
  8. A4 - Input A4
  9. Y4 - Output Y4
  10. GND - Ground
  11. Y5 - Output Y5
  12. A5 - Input A5
  13. Y6 - Output Y6
  14. A6 - Input A6
  15. Y7 - Output Y7
  16. VCC - Supply Voltage
  17. Y8 - Output Y8
  18. OE - Output Enable
  19. A7 - Input A7
  20. GND - Ground

Functional Features

  • 8-bit buffer/driver with 3-state outputs
  • Non-inverting outputs
  • High output drive capability
  • Compatible with TTL inputs
  • Can be used as a level translator

Advantages and Disadvantages

Advantages

  • Fast operation speed
  • Low power consumption
  • Wide operating voltage range allows compatibility with various systems
  • Noise immunity due to Schmitt-trigger inputs
  • Suitable for bus-oriented applications

Disadvantages

  • Limited number of input/output pins (8-bit)
  • Not suitable for high-voltage applications

Working Principles

SN74HC240DWR operates by receiving input signals on its A1-A7 pins, which are then buffered and amplified. The output signals on the Y1-Y8 pins can be enabled or disabled using the OE pin. When the OE pin is low, the outputs are active, allowing data transmission. Conversely, when the OE pin is high, the outputs are in a high-impedance state, effectively disconnecting them from the system.

Detailed Application Field Plans

SN74HC240DWR finds extensive use in various electronic applications, including: - Data communication systems - Microcontroller interfacing - Memory address decoding - Bus drivers - Signal buffering in digital circuits

Detailed and Complete Alternative Models

  1. SN74HC244DWR
  2. SN74HCT240DWR
  3. SN74LS240DWR
  4. SN74ACT240DWR
  5. SN74LVC240DWR

These alternative models offer similar functionality and characteristics to SN74HC240DWR, providing flexibility in choosing the most suitable option for specific applications.

Word count: 529 words

기술 솔루션에 SN74HC240DWR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SN74HC240DWR:

  1. Q: What is SN74HC240DWR? A: SN74HC240DWR is a type of integrated circuit (IC) that functions as an octal buffer/line driver with 3-state outputs.

  2. Q: What is the voltage supply range for SN74HC240DWR? A: The voltage supply range for SN74HC240DWR is typically between 2V and 6V.

  3. Q: How many input/output pins does SN74HC240DWR have? A: SN74HC240DWR has 8 input pins and 8 output pins, making it suitable for applications requiring multiple signal buffering.

  4. Q: Can SN74HC240DWR handle high-speed signals? A: Yes, SN74HC240DWR is designed to handle high-speed signals, making it suitable for applications where fast data transfer is required.

  5. Q: What is the maximum output current of SN74HC240DWR? A: The maximum output current of SN74HC240DWR is typically around 35mA per channel.

  6. Q: Is SN74HC240DWR compatible with TTL logic levels? A: Yes, SN74HC240DWR is compatible with both CMOS and TTL logic levels, allowing for easy integration into existing systems.

  7. Q: Can SN74HC240DWR be used for bidirectional communication? A: Yes, SN74HC240DWR supports bidirectional communication by using its 3-state outputs, enabling both input and output functionality.

  8. Q: What is the propagation delay of SN74HC240DWR? A: The propagation delay of SN74HC240DWR is typically around 10ns, making it suitable for applications requiring fast response times.

  9. Q: Can SN74HC240DWR be used in automotive applications? A: Yes, SN74HC240DWR is designed to meet automotive industry standards and can be used in automotive applications.

  10. Q: Are there any recommended operating conditions for SN74HC240DWR? A: Yes, some recommended operating conditions include a temperature range of -40°C to 85°C and a maximum supply voltage of 6V.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's recommendations for SN74HC240DWR.