Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SN74LS273DW
자세히보기 데이터시트

SN74LS273DW

Product Overview

Category

SN74LS273DW belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in digital electronics for storing and manipulating data.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

SN74LS273DW is available in a dual in-line package (DIP) format.

Essence

The essence of SN74LS273DW lies in its ability to store and process data efficiently, making it an essential component in many electronic devices.

Packaging/Quantity

SN74LS273DW is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs.

Specifications

  • Supply Voltage: 4.75V to 5.25V
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: LS
  • Number of Flip-Flops: 8
  • Output Type: Tri-State
  • Propagation Delay Time: 15ns (max)
  • Input Capacitance: 3pF (typ)

Detailed Pin Configuration

  1. CLR (Clear)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. GND (Ground)
  11. Q7 (Output 7)
  12. Q6 (Output 6)
  13. Q5 (Output 5)
  14. Q4 (Output 4)
  15. Q3 (Output 3)
  16. Q2 (Output 2)
  17. Q1 (Output 1)
  18. Q0 (Output 0)
  19. CLK (Clock Input)
  20. VCC (Supply Voltage)

Functional Features

  • Data storage: SN74LS273DW can store data in its eight flip-flops.
  • Clock-controlled operation: The stored data can be read or written based on the clock input.
  • Tri-state outputs: The outputs can be disabled using the clear input, allowing multiple devices to share a common bus.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data processing.
  • Low power consumption helps conserve energy.
  • Wide operating voltage range allows for compatibility with various systems.
  • Tri-state outputs facilitate bus sharing.

Disadvantages

  • Limited number of flip-flops may restrict the complexity of data manipulation.
  • Propagation delay time may affect real-time applications.

Working Principles

SN74LS273DW operates based on the principles of digital logic. It uses flip-flops to store binary data and a clock signal to control the reading and writing of data. The tri-state outputs enable the device to be connected to a shared bus, providing flexibility in data transfer.

Detailed Application Field Plans

SN74LS273DW finds applications in various fields, including: 1. Microcontrollers 2. Digital signal processing 3. Communication systems 4. Industrial automation 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that serve similar functions to SN74LS273DW are: 1. SN74HC273: High-speed CMOS octal D-type flip-flop 2. CD4013B: Dual D-type flip-flop 3. MC74HC373A: Octal transparent latch with 3-state outputs

These alternative models offer different specifications and characteristics, allowing users to choose the most suitable option for their specific requirements.

Word count: 516 words

기술 솔루션에 SN74LS273DW 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SN74LS273DW:

  1. Q: What is SN74LS273DW? A: SN74LS273DW is a type of integrated circuit (IC) known as a D-type flip-flop. It has eight individual flip-flops in a single package.

  2. Q: What is the purpose of SN74LS273DW? A: SN74LS273DW is used for storing and manipulating digital data in electronic circuits. It can be used for various applications such as memory storage, counters, and registers.

  3. Q: How does SN74LS273DW work? A: Each flip-flop in SN74LS273DW stores a single bit of data. The input signals control when the data is stored or transferred to the output. It operates based on clock signals and can be triggered by rising or falling edges.

  4. Q: What is the voltage range supported by SN74LS273DW? A: SN74LS273DW supports a voltage range of 4.75V to 5.25V, making it compatible with standard TTL logic levels.

  5. Q: Can SN74LS273DW handle high-speed data transfers? A: Yes, SN74LS273DW is designed to operate at high speeds. It has a typical propagation delay of 15ns, allowing for fast data transfer rates.

  6. Q: How many inputs and outputs does SN74LS273DW have? A: SN74LS273DW has eight inputs (D0-D7) and eight outputs (Q0-Q7), corresponding to each flip-flop.

  7. Q: Can SN74LS273DW be cascaded to increase the number of flip-flops? A: Yes, multiple SN74LS273DW ICs can be cascaded together to increase the number of flip-flops and create larger storage or counting circuits.

  8. Q: What is the power consumption of SN74LS273DW? A: The power consumption of SN74LS273DW depends on various factors such as clock frequency and input/output loading. It typically consumes around 10-20mA of current.

  9. Q: Is SN74LS273DW compatible with other logic families? A: SN74LS273DW is designed to be compatible with TTL (Transistor-Transistor Logic) logic levels. However, it may not be directly compatible with other logic families like CMOS (Complementary Metal-Oxide-Semiconductor).

  10. Q: Can SN74LS273DW be used in both digital and analog circuits? A: No, SN74LS273DW is specifically designed for digital applications. It is not suitable for use in analog circuits.