Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TAS5720MRSMR
자세히보기 데이터시트

TAS5720MRSMR

Product Overview

Category

TAS5720MRSMR belongs to the category of audio amplifier integrated circuits.

Use

It is primarily used for amplifying audio signals in various electronic devices such as televisions, home theater systems, and car audio systems.

Characteristics

  • High-quality audio amplification
  • Low power consumption
  • Compact size
  • Wide operating voltage range
  • Built-in protection features against short circuits and thermal overload

Package

TAS5720MRSMR is available in a small outline package (SOP) which ensures easy integration into different circuit boards.

Essence

The essence of TAS5720MRSMR lies in its ability to provide efficient and high-fidelity audio amplification while consuming minimal power.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of TAS5720MRSMR integrated circuits.

Specifications

  • Power Supply Voltage: 4.5V - 26V
  • Output Power: 20W per channel (at 10% THD+N)
  • Total Harmonic Distortion + Noise (THD+N): <0.1%
  • Signal-to-Noise Ratio (SNR): >100dB
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VDD: Power supply voltage input
  2. GND: Ground reference
  3. SD: Shutdown control input
  4. MUTE: Mute control input
  5. INL-/INL+: Left channel audio input
  6. INR-/INR+: Right channel audio input
  7. PVDD: Power supply voltage for output stage
  8. OUTL-/OUTL+: Left channel audio output
  9. OUTR-/OUTR+: Right channel audio output

Functional Features

  • High-quality audio amplification with low distortion
  • Wide operating voltage range allows for flexibility in different applications
  • Built-in shutdown and mute control for power management and audio control
  • Protection features such as short circuit and thermal overload protection ensure the safety of the device and connected speakers

Advantages and Disadvantages

Advantages

  • High-fidelity audio amplification
  • Low power consumption
  • Compact size for easy integration
  • Wide operating voltage range for versatility
  • Built-in protection features for enhanced safety

Disadvantages

  • Limited output power compared to higher wattage amplifiers
  • May require additional components for a complete audio system setup

Working Principles

TAS5720MRSMR operates on the principle of amplifying audio signals using a class-D amplifier architecture. It converts the input audio signal into a high-frequency pulse-width modulated (PWM) signal, which is then amplified and filtered to produce the final amplified audio output.

Detailed Application Field Plans

TAS5720MRSMR finds applications in various electronic devices, including: 1. Televisions and home theater systems 2. Car audio systems 3. Portable audio devices 4. Multimedia speakers 5. Gaming consoles

Detailed and Complete Alternative Models

  1. TAS5722MRSMR: Similar to TAS5720MRSMR but with higher output power capability.
  2. TAS5717MRSMR: A lower-power variant suitable for battery-powered applications.
  3. TAS5709MRSMR: Offers advanced audio processing features along with amplification capabilities.

These alternative models provide options based on specific requirements and power needs.

Word count: 410 words

기술 솔루션에 TAS5720MRSMR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of TAS5720MRSMR in technical solutions:

  1. Q: What is TAS5720MRSMR? A: TAS5720MRSMR is a digital input, closed-loop Class-D audio amplifier designed for automotive applications.

  2. Q: What are the key features of TAS5720MRSMR? A: The key features include high efficiency, low idle power consumption, integrated protection features, and support for various audio formats.

  3. Q: What is the power output of TAS5720MRSMR? A: TAS5720MRSMR can deliver up to 30 watts per channel into a 4-ohm load.

  4. Q: Can TAS5720MRSMR be used in non-automotive applications? A: Yes, TAS5720MRSMR can also be used in other audio applications where a high-quality, efficient amplifier is required.

  5. Q: Does TAS5720MRSMR support multiple audio inputs? A: Yes, TAS5720MRSMR supports multiple digital audio inputs, including I2S, TDM, and PDM.

  6. Q: What kind of protection features does TAS5720MRSMR offer? A: TAS5720MRSMR includes protection against over-temperature, over-voltage, under-voltage, and short-circuit conditions.

  7. Q: Can TAS5720MRSMR be controlled using a microcontroller? A: Yes, TAS5720MRSMR can be easily controlled using an I2C interface, allowing for flexible control and configuration.

  8. Q: Is TAS5720MRSMR compatible with different audio sampling rates? A: Yes, TAS5720MRSMR supports audio sampling rates from 8 kHz to 96 kHz, making it compatible with a wide range of audio sources.

  9. Q: Does TAS5720MRSMR require external components for operation? A: Yes, TAS5720MRSMR requires a few external components such as power supply, decoupling capacitors, and input/output filters for proper operation.

  10. Q: Can multiple TAS5720MRSMR amplifiers be used together in a system? A: Yes, multiple TAS5720MRSMR amplifiers can be easily configured in a multi-channel setup to achieve higher power output or support more audio channels.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.