TLV2460AQDRG4Q1

Product Overview

• Category: Operational Amplifier
• Use: TLV2460AQDRG4Q1 is a low-power, rail-to-rail input/output operational amplifier designed for automotive applications.
• Characteristics: It offers low offset voltage, low quiescent current, and high open-loop gain. The device operates from a single supply voltage as low as 2.7V and can operate with a common-mode input voltage range that extends below the negative rail.
• Package: TLV2460AQDRG4Q1 comes in a small outline package (SOIC) with eight pins.
• Essence: This operational amplifier is specifically designed to meet the stringent requirements of automotive systems, providing reliable and accurate performance in harsh environments.
• Packaging/Quantity: TLV2460AQDRG4Q1 is available in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

• Supply Voltage Range: 2.7V to 5.5V
• Input Offset Voltage: ±1.5mV (maximum)
• Quiescent Current: 900µA (typical)
• Gain Bandwidth Product: 10MHz (typical)
• Slew Rate: 6V/µs (typical)
• Common-Mode Rejection Ratio: 100dB (typical)
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV2460AQDRG4Q1 has the following pin configuration:

```

---

| | --| IN- VCC |-- --| IN+ OUT |-- --| GND NC |-- |___________| ```

Functional Features

• Rail-to-rail input and output
• Low offset voltage and low quiescent current
• High open-loop gain
• Wide common-mode input voltage range
• Stable operation in harsh automotive environments

Advantages and Disadvantages

Advantages: - Suitable for automotive applications - Reliable performance in harsh environments - Low power consumption - Wide operating temperature range

Disadvantages: - Limited supply voltage range (2.7V to 5.5V) - Not suitable for high-frequency applications

Working Principles

The TLV2460AQDRG4Q1 is an operational amplifier that amplifies the difference between its two input terminals. It operates by using a feedback mechanism to maintain the desired output voltage based on the input signals. The rail-to-rail input/output capability allows the amplifier to handle signals that extend from the negative rail to the positive rail.

Detailed Application Field Plans

The TLV2460AQDRG4Q1 is commonly used in various automotive applications, including:

1. Sensor signal conditioning
2. Battery monitoring systems
3. Motor control systems
4. Audio systems
5. Power management systems

Alternative Models

Here are some alternative models that can be considered as substitutes for TLV2460AQDRG4Q1:

1. LMV321
2. MCP6001
3. MAX4239
4. AD8605
5. OPA333

These models offer similar characteristics and can be used in similar applications.

In conclusion, the TLV2460AQDRG4Q1 is a low-power operational amplifier designed for automotive applications. It provides reliable and accurate performance in harsh environments, making it suitable for various automotive systems.