Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TPS22986YFPR
자세히보기 데이터시트

TPS22986YFPR

Product Overview

Category

The TPS22986YFPR belongs to the category of power management integrated circuits (PMICs).

Use

It is primarily used for managing power in electronic devices, specifically for load switching applications.

Characteristics

  • Low on-resistance
  • Fast switching speed
  • Wide input voltage range
  • Overcurrent and thermal protection
  • Low quiescent current

Package

The TPS22986YFPR is available in a small 12-pin DSBGA package.

Essence

The essence of TPS22986YFPR lies in its ability to efficiently control power flow within electronic devices, ensuring optimal performance and protection against overcurrent and thermal issues.

Packaging/Quantity

The TPS22986YFPR is typically packaged in reels, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 1.5V to 5.5V
  • On-Resistance: 30mΩ (typical)
  • Quiescent Current: 0.5µA (typical)
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TPS22986YFPR has the following pin configuration:

  1. EN (Enable)
  2. IN (Input Voltage)
  3. GND (Ground)
  4. PG (Power Good)
  5. OUT (Output Voltage)
  6. FB (Feedback)

Functional Features

  • Load switching capability
  • Power sequencing support
  • Overcurrent and thermal protection
  • Power good indicator
  • Enable/disable control

Advantages and Disadvantages

Advantages

  • Low on-resistance ensures minimal power loss
  • Fast switching speed enhances overall system efficiency
  • Wide input voltage range allows compatibility with various power sources
  • Overcurrent and thermal protection safeguards against potential damage
  • Low quiescent current minimizes power consumption during standby

Disadvantages

  • Limited pin configuration options may restrict certain system designs
  • Relatively small package size may require careful handling during assembly

Working Principles

The TPS22986YFPR operates by controlling the flow of power between the input voltage (IN) and the output voltage (OUT) based on the enable signal (EN). When enabled, the device allows power to pass from the input to the output. It also incorporates overcurrent and thermal protection mechanisms to prevent excessive current or temperature levels.

Detailed Application Field Plans

The TPS22986YFPR finds applications in various electronic devices that require efficient load switching and power management. Some specific application fields include:

  1. Mobile devices: Smartphones, tablets, portable gaming consoles.
  2. Wearable electronics: Smartwatches, fitness trackers, augmented reality glasses.
  3. IoT devices: Home automation systems, smart sensors, connected appliances.
  4. Industrial equipment: Control systems, motor drives, robotics.
  5. Automotive electronics: Infotainment systems, advanced driver-assistance systems (ADAS), lighting control.

Detailed and Complete Alternative Models

  1. TPS22988YFPR: Similar to TPS22986YFPR but with additional features for power sequencing.
  2. TPS22987YFPR: A higher-current variant of TPS22986YFPR, suitable for applications with increased power requirements.
  3. TPS22985YFPR: A lower-current version of TPS22986YFPR, ideal for low-power devices with minimal power consumption needs.

These alternative models offer similar functionality and characteristics, providing flexibility for different design requirements.

Word count: 550 words

기술 솔루션에 TPS22986YFPR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of TPS22986YFPR in technical solutions:

  1. Q: What is TPS22986YFPR? A: TPS22986YFPR is a power distribution switch with an integrated power-good output, commonly used in electronic devices to control the flow of power to different components.

  2. Q: What is the maximum input voltage supported by TPS22986YFPR? A: The maximum input voltage supported by TPS22986YFPR is typically around 5.5V.

  3. Q: Can TPS22986YFPR handle high current loads? A: Yes, TPS22986YFPR is designed to handle high current loads, with a typical maximum continuous current rating of around 4A.

  4. Q: How does TPS22986YFPR protect against overcurrent conditions? A: TPS22986YFPR has built-in overcurrent protection that limits the current flow to a safe level when the load exceeds the specified threshold.

  5. Q: Does TPS22986YFPR have thermal shutdown protection? A: Yes, TPS22986YFPR incorporates thermal shutdown protection to prevent damage due to excessive heat.

  6. Q: Can TPS22986YFPR be used in battery-powered applications? A: Yes, TPS22986YFPR can be used in battery-powered applications as it has a low quiescent current and supports low-voltage operation.

  7. Q: Is TPS22986YFPR suitable for automotive applications? A: Yes, TPS22986YFPR is designed to meet automotive-grade requirements, making it suitable for use in automotive applications.

  8. Q: Can TPS22986YFPR be controlled using a microcontroller? A: Yes, TPS22986YFPR can be controlled using a microcontroller by connecting the control pin to a GPIO pin of the microcontroller.

  9. Q: Does TPS22986YFPR have reverse polarity protection? A: No, TPS22986YFPR does not have built-in reverse polarity protection. External measures need to be taken to protect against reverse polarity.

  10. Q: What is the typical operating temperature range for TPS22986YFPR? A: The typical operating temperature range for TPS22986YFPR is -40°C to +85°C, making it suitable for a wide range of environments.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.