Texas Instruments
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TPS60231RGTTG4
자세히보기 데이터시트

TPS60231RGTTG4

Product Overview

Category

The TPS60231RGTTG4 belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators category.

Use

This IC is primarily used as a boost converter, which means it can step up the input voltage to a higher output voltage level. It is commonly employed in various electronic devices where a higher voltage is required for proper operation.

Characteristics

  • Boost converter with high efficiency
  • Wide input voltage range
  • Adjustable output voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

The TPS60231RGTTG4 is available in a small 16-pin QFN package. This package offers good thermal performance and ease of integration into circuit designs.

Essence

The essence of the TPS60231RGTTG4 lies in its ability to efficiently convert lower input voltages to higher output voltages, making it suitable for applications that require a stable and regulated power supply.

Packaging/Quantity

The TPS60231RGTTG4 is typically sold in reels containing 2500 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 3.3V to 5.5V
  • Quiescent Current: 40µA (typical)
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TPS60231RGTTG4 has the following pin configuration:

  1. EN (Enable): Enable pin for turning the device on/off.
  2. FB (Feedback): Feedback pin for adjusting the output voltage.
  3. VOUT (Output Voltage): Output voltage pin.
  4. SW (Switch Node): Switching node for the boost converter.
  5. GND (Ground): Ground reference pin.
  6. LX (Inductor Connection): Connection point for the inductor.
  7. PGND (Power Ground): Power ground reference pin.
  8. VCC (Supply Voltage): Supply voltage input pin.
  9. SS/TR (Soft-Start/Tracking): Soft-start and tracking control pin.
  10. BST (Bootstrap): Bootstrap capacitor connection pin.
  11. NC (No Connect): No connection pin.
  12. NC (No Connect): No connection pin.
  13. NC (No Connect): No connection pin.
  14. NC (No Connect): No connection pin.
  15. NC (No Connect): No connection pin.
  16. NC (No Connect): No connection pin.

Functional Features

The TPS60231RGTTG4 offers the following functional features:

  1. High Efficiency: The boost converter design ensures efficient power conversion, minimizing energy losses.
  2. Wide Input Voltage Range: The IC can accept a wide range of input voltages, making it versatile for various applications.
  3. Adjustable Output Voltage: The output voltage can be adjusted within a specified range to meet specific requirements.
  4. Overcurrent Protection: The device incorporates overcurrent protection to safeguard against excessive current flow.
  5. Thermal Shutdown Protection: In case of excessive temperature rise, the IC automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows compatibility with different power sources.
  • Adjustable output voltage provides flexibility in system design.
  • Overcurrent and thermal shutdown protection enhance reliability and safety.

Disadvantages

  • Limited output voltage range may not be suitable for certain applications requiring higher voltages.
  • The small package size may pose challenges during assembly and soldering processes.

Working Principles

The TPS60231RGTTG4 operates as a boost converter, utilizing an inductor and a switching transistor to step up the input voltage. When enabled, the IC controls the switching of the transistor, which causes the inductor to store energy during the "on" state and release it during the "off" state. This energy transfer results in a higher output voltage than the input voltage.

Detailed Application Field Plans

The TPS60231RGTTG4 finds applications in various electronic devices, including but not limited to: - Battery-powered portable devices - Wireless communication systems - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  1. TPS61040RGYR: Boost converter with similar characteristics and package.
  2. TPS61220DCKR: Step-up converter with adjustable output voltage.
  3. TPS61161DRVR: High-efficiency boost converter with integrated power switch.

These alternative models offer similar functionality and can be considered as substitutes for the TPS60231RGTTG4 in different applications.

Word count: 697 words

기술 솔루션에 TPS60231RGTTG4 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of TPS60231RGTTG4 in technical solutions:

  1. Q: What is TPS60231RGTTG4? A: TPS60231RGTTG4 is a step-up (boost) converter integrated circuit (IC) designed for generating a regulated output voltage from a low input voltage.

  2. Q: What is the input voltage range of TPS60231RGTTG4? A: The input voltage range of TPS60231RGTTG4 is typically between 0.9V and 5.5V.

  3. Q: What is the output voltage range of TPS60231RGTTG4? A: The output voltage range of TPS60231RGTTG4 can be adjusted from 1.8V to 5.5V using external resistors.

  4. Q: What is the maximum output current of TPS60231RGTTG4? A: The maximum output current of TPS60231RGTTG4 is typically 100mA.

  5. Q: Can TPS60231RGTTG4 operate in a wide temperature range? A: Yes, TPS60231RGTTG4 is designed to operate in a temperature range of -40°C to +85°C.

  6. Q: Does TPS60231RGTTG4 have built-in protection features? A: Yes, TPS60231RGTTG4 includes overcurrent protection, thermal shutdown, and undervoltage lockout features to ensure safe operation.

  7. Q: Can TPS60231RGTTG4 be used in battery-powered applications? A: Yes, TPS60231RGTTG4 is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  8. Q: What is the typical efficiency of TPS60231RGTTG4? A: The typical efficiency of TPS60231RGTTG4 is around 90% at full load.

  9. Q: Does TPS60231RGTTG4 require any external components for operation? A: Yes, TPS60231RGTTG4 requires a few external components such as input/output capacitors and resistors to set the output voltage.

  10. Q: Can TPS60231RGTTG4 be used in space-constrained applications? A: Yes, TPS60231RGTTG4 is available in a small package (RGT) and requires minimal external components, making it suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on specific application requirements and conditions. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.