TPS62130ARGTT

Product Overview

Category

The TPS62130ARGTT belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators - switching regulators family.

Use

This product is primarily used as a step-down converter, providing efficient power conversion from a higher input voltage to a lower output voltage. It is commonly employed in various electronic devices and systems where power management is crucial.

Characteristics

• High efficiency: The TPS62130ARGTT offers high conversion efficiency, minimizing power losses during voltage conversion.
• Wide input voltage range: It can handle input voltages ranging from 3V to 17V, making it suitable for a wide range of applications.
• Adjustable output voltage: The output voltage can be adjusted within a range of 0.8V to 6V, allowing flexibility in different system requirements.
• Low quiescent current: The device features low quiescent current consumption, reducing power consumption during standby or idle modes.
• Overcurrent and thermal protection: It incorporates built-in protection mechanisms to safeguard against overcurrent and excessive temperature conditions.

Package and Quantity

The TPS62130ARGTT is available in a small outline package (SON) with a total of 16 pins. It is typically supplied in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

• Input Voltage Range: 3V to 17V
• Output Voltage Range: 0.8V to 6V
• Maximum Output Current: 1.5A
• Switching Frequency: 2.25MHz
• Quiescent Current: 40µA
• Operating Temperature Range: -40°C to 125°C

Pin Configuration

The TPS62130ARGTT has a total of 16 pins, each serving a specific function. The detailed pin configuration is as follows:

1. VIN: Input voltage pin
2. PGND: Power ground pin
3. SW: Switching node connection pin
4. FB: Feedback voltage pin
5. EN: Enable pin
6. SS/TR: Soft-start/Tracking pin
7. VOS: Output voltage sense pin
8. AGND: Analog ground pin
9. AGND: Analog ground pin
10. AGND: Analog ground pin
11. AGND: Analog ground pin
12. AGND: Analog ground pin
13. AGND: Analog ground pin
14. AGND: Analog ground pin
15. AGND: Analog ground pin
16. VOUT: Output voltage pin

Functional Features

• High efficiency conversion for power management applications.
• Adjustable output voltage to meet various system requirements.
• Overcurrent and thermal protection mechanisms ensure safe operation.
• Low quiescent current consumption for reduced power wastage during standby.

Advantages and Disadvantages

Advantages

• High conversion efficiency minimizes power losses.
• Wide input voltage range allows versatility in application.
• Adjustable output voltage provides flexibility.
• Built-in protection mechanisms enhance reliability.

Disadvantages

• Limited maximum output current of 1.5A may not be suitable for high-power applications.
• Higher switching frequency may introduce additional noise in sensitive systems.

Working Principles

The TPS62130ARGTT operates on the principle of pulse width modulation (PWM) to regulate the output voltage. It utilizes a high-frequency switching transistor to rapidly switch the input voltage on and off. This switching action, combined with an inductor and capacitor, creates a regulated output voltage that is lower than the input voltage. The feedback mechanism continuously monitors the output voltage and adjusts the duty cycle of the switching transistor to maintain the desired output voltage level.

Application Field Plans

The TPS62130ARGTT finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial automation - Automotive electronics - Telecommunications equipment

Alternative Models

For those seeking alternative models with similar functionality, the following options are available: - TPS62131ARGTT - TPS62132ARGTT - TPS62133ARGTT - TPS62134ARGTT

These models offer comparable features and specifications, providing alternatives for different design requirements.

Word count: 533 words