이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6108C18BGR-G

XC6108C18BGR-G

Product Overview

Category

XC6108C18BGR-G belongs to the category of voltage regulators.

Use

It is commonly used as a power management solution in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High output current
  • Thermal shutdown protection
  • Short-circuit protection

Package

XC6108C18BGR-G is available in a small form factor package, such as SOT-23 or DFN.

Essence

The essence of XC6108C18BGR-G lies in its ability to regulate and stabilize the input voltage to a desired level for various electronic applications.

Packaging/Quantity

Typically, XC6108C18BGR-G is packaged in reels or tubes, with quantities ranging from a few hundred to several thousand units per package.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C18BGR-G has three pins:

  1. VIN: Input voltage pin
  2. VOUT: Output voltage pin
  3. GND: Ground pin

Functional Features

  • Voltage Regulation: XC6108C18BGR-G ensures a stable output voltage of 1.8V regardless of input voltage fluctuations.
  • Low Dropout Voltage: The device maintains a low dropout voltage, minimizing power dissipation.
  • Thermal Shutdown Protection: It incorporates thermal shutdown protection to prevent overheating and potential damage.
  • Short-Circuit Protection: XC6108C18BGR-G safeguards against short-circuits, ensuring the safety of the connected circuitry.

Advantages and Disadvantages

Advantages

  • High output current capability
  • Wide input voltage range
  • Low quiescent current
  • Small form factor package

Disadvantages

  • Limited output voltage options (fixed at 1.8V)
  • Not suitable for high-power applications

Working Principles

XC6108C18BGR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the internal pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6108C18BGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6108C18BGR-G include: - XC6201P182MR-G - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT

These alternatives can be considered based on specific requirements and availability.

Word count: 346 words

기술 솔루션에 XC6108C18BGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6108C18BGR-G in technical solutions:

  1. Q: What is XC6108C18BGR-G? A: XC6108C18BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C18BGR-G? A: The operating voltage range of XC6108C18BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C18BGR-G help in technical solutions? A: XC6108C18BGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning caused by low voltage conditions.

  4. Q: Can XC6108C18BGR-G be used in battery-powered applications? A: Yes, XC6108C18BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6108C18BGR-G? A: XC6108C18BGR-G has an open-drain output type, which allows for flexibility in connecting external components.

  6. Q: What is the typical reset threshold voltage of XC6108C18BGR-G? A: The typical reset threshold voltage of XC6108C18BGR-G is 1.8V.

  7. Q: Does XC6108C18BGR-G have a built-in delay time for the reset signal? A: Yes, XC6108C18BGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Q: Can XC6108C18BGR-G be used in automotive applications? A: Yes, XC6108C18BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the package type of XC6108C18BGR-G? A: XC6108C18BGR-G is available in a small SOT-25 package, which is compact and space-saving.

  10. Q: Is XC6108C18BGR-G RoHS compliant? A: Yes, XC6108C18BGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring environmental friendliness.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C18BGR-G.