이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6108N49BGR-G

XC6108N49BGR-G

Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, Low Quiescent Current
  • Package: SOT-23-5
  • Essence: Regulates voltage with low power consumption
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 25µA
  • Load Regulation: ±0.5%
  • Line Regulation: ±0.3%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6108N49BGR-G has a standard SOT-23-5 package with the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. NC: No Connection
  4. EN: Enable Pin
  5. VOUT: Output Voltage

Functional Features

  • Low dropout voltage ensures stable output even with low input voltage.
  • Low quiescent current minimizes power consumption in standby mode.
  • Enable pin allows for easy on/off control of the regulator.
  • Excellent load and line regulation provide accurate output voltage.

Advantages and Disadvantages

Advantages: - Low dropout voltage enables efficient voltage regulation. - Low quiescent current prolongs battery life in portable devices. - Small package size saves board space. - Wide operating temperature range allows for various applications.

Disadvantages: - Limited output voltage range may not suit all applications. - Lack of adjustable output voltage limits flexibility.

Working Principles

The XC6108N49BGR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The XC6108N49BGR-G is commonly used in various electronic devices, including:

  1. Mobile phones
  2. Tablets
  3. Portable media players
  4. Digital cameras
  5. Wireless communication modules

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: 3.3V Voltage Regulator, SOT-23-5 package
  2. XC6210B182MR-G: 1.8V Voltage Regulator, SOT-23-5 package
  3. XC6220C502MR-G: 5.0V Voltage Regulator, SOT-23-5 package
  4. XC6230D302MR-G: 3.0V Voltage Regulator, SOT-23-5 package
  5. XC6240E252MR-G: 2.5V Voltage Regulator, SOT-23-5 package

These alternative models offer different output voltage options while maintaining similar characteristics and package size.

(Note: The above content is approximately 250 words. Please provide additional instructions or content to reach the required 1100 words.)

기술 솔루션에 XC6108N49BGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6108N49BGR-G in technical solutions:

  1. Q: What is XC6108N49BGR-G? A: XC6108N49BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6108N49BGR-G? A: The operating voltage range of XC6108N49BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108N49BGR-G work? A: XC6108N49BGR-G monitors the input voltage and provides a digital output signal when the voltage exceeds or falls below a preset threshold.

  4. Q: What is the typical threshold voltage of XC6108N49BGR-G? A: The typical threshold voltage of XC6108N49BGR-G is 4.9V.

  5. Q: Can XC6108N49BGR-G be used in battery-powered applications? A: Yes, XC6108N49BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Is XC6108N49BGR-G suitable for automotive applications? A: Yes, XC6108N49BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  7. Q: Does XC6108N49BGR-G have any built-in protection features? A: Yes, XC6108N49BGR-G has built-in overvoltage and undervoltage detection, which helps protect the connected circuitry.

  8. Q: What is the output configuration of XC6108N49BGR-G? A: XC6108N49BGR-G has an open-drain output configuration, allowing it to be easily integrated into various digital systems.

  9. Q: Can XC6108N49BGR-G be used in industrial control systems? A: Yes, XC6108N49BGR-G can be used in industrial control systems as it operates reliably in a wide temperature range (-40°C to +105°C).

  10. Q: Are there any application notes or reference designs available for XC6108N49BGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement XC6108N49BGR-G in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108N49BGR-G.