XC6118C35AGR-G belongs to the category of voltage regulators.
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
XC6118C35AGR-G is available in a small surface-mount package.
The essence of XC6118C35AGR-G lies in its ability to provide stable and regulated voltage output.
The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
XC6118C35AGR-G has the following pin configuration:
XC6118C35AGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. This ensures that the output voltage remains stable even when the input voltage or load conditions change.
XC6118C35AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Some alternative models that offer similar functionality to XC6118C35AGR-G are: - LM1117-3.3 - LT1763-3.3 - MCP1703-3302E/DB
These models can be considered as alternatives based on their specifications, pin configuration, and functional features.
In conclusion, XC6118C35AGR-G is a voltage regulator that provides stable and regulated voltage output. With its low dropout voltage, high accuracy, and thermal shutdown protection, it offers reliable performance in various electronic applications. However, it has limitations in terms of input voltage range and may not be suitable for low-power applications. Alternative models such as LM1117-3.3, LT1763-3.3, and MCP1703-3302E/DB can be considered as substitutes.
Sure! Here are 10 common questions and answers related to the application of XC6118C35AGR-G in technical solutions:
Q: What is XC6118C35AGR-G? A: XC6118C35AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C35AGR-G? A: The operating voltage range of XC6118C35AGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C35AGR-G help in technical solutions? A: XC6118C35AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6118C35AGR-G? A: The typical reset voltage threshold of XC6118C35AGR-G is 3.5V.
Q: Can XC6118C35AGR-G be used in battery-powered applications? A: Yes, XC6118C35AGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Is XC6118C35AGR-G suitable for automotive applications? A: Yes, XC6118C35AGR-G is suitable for automotive applications as it meets the required automotive standards and has a wide operating temperature range.
Q: Does XC6118C35AGR-G have any built-in delay time for the reset signal? A: Yes, XC6118C35AGR-G has a built-in delay time of approximately 200ms to ensure stable operation during power-up or voltage fluctuations.
Q: Can XC6118C35AGR-G be used in low-power applications? A: Yes, XC6118C35AGR-G is suitable for low-power applications as it consumes very low quiescent current (typically around 1μA).
Q: What is the package type of XC6118C35AGR-G? A: XC6118C35AGR-G is available in a SOT-25 package, which is a small surface-mount package with three pins.
Q: Is XC6118C35AGR-G RoHS compliant? A: Yes, XC6118C35AGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C35AGR-G.