XC6118C35DGR-G
Product Overview
Category
XC6118C35DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6118C35DGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: It consumes minimal power when in standby mode.
- Overcurrent protection: It safeguards the circuit by limiting the current flow.
- Thermal shutdown protection: It prevents overheating by shutting down the regulator in case of excessive temperature.
Package
XC6118C35DGR-G is available in a small form factor package, making it suitable for space-constrained applications.
Essence
The essence of XC6118C35DGR-G lies in its ability to provide reliable and stable voltage regulation, ensuring proper functioning of electronic devices.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 3.3V
- Maximum output current: 150mA
- Dropout voltage: 200mV (at 100mA)
- Quiescent current: 30μA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118C35DGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: Maintains a constant output voltage despite variations in input voltage and load conditions.
- Overcurrent protection: Safeguards the circuit by limiting the current flow to prevent damage.
- Thermal shutdown protection: Shuts down the regulator if the temperature exceeds a safe threshold, preventing overheating.
Advantages and Disadvantages
Advantages
- Stable output voltage ensures reliable operation of connected components.
- Low dropout voltage allows efficient operation even with small input-output voltage differentials.
- Low quiescent current minimizes power consumption in standby mode.
- Overcurrent and thermal shutdown protection enhance circuit safety.
Disadvantages
- Limited maximum output current may restrict its use in high-power applications.
- Narrow input voltage range may not be suitable for all scenarios.
Working Principles
XC6118C35DGR-G utilizes internal circuitry to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal feedback loop to maintain a stable output. The overcurrent and thermal shutdown protection mechanisms ensure the safety and longevity of the regulator.
Detailed Application Field Plans
XC6118C35DGR-G finds application in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C35DGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - LP2985-33DBVR - NCP1117ST33T3G
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.
Word count: 464 words
기술 솔루션에 XC6118C35DGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of XC6118C35DGR-G in technical solutions:
Q: What is XC6118C35DGR-G? A: XC6118C35DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6118C35DGR-G? A: The operating voltage range of XC6118C35DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C35DGR-G help in technical solutions? A: XC6118C35DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a certain level, ensuring proper system initialization.
Q: Can XC6118C35DGR-G be used in battery-powered applications? A: Yes, XC6118C35DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: What is the typical reset threshold voltage of XC6118C35DGR-G? A: The typical reset threshold voltage of XC6118C35DGR-G is 3.5V.
Q: Does XC6118C35DGR-G have an adjustable reset threshold voltage? A: No, XC6118C35DGR-G has a fixed reset threshold voltage and does not provide an option for adjustment.
Q: Is XC6118C35DGR-G compatible with both CMOS and TTL logic levels? A: Yes, XC6118C35DGR-G is compatible with both CMOS (0V to Vcc) and TTL (0V to 5.0V) logic levels.
Q: Can XC6118C35DGR-G be used in automotive applications? A: Yes, XC6118C35DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6118C35DGR-G? A: XC6118C35DGR-G is available in a SOT-25 package, which is a small surface-mount package with three leads.
Q: Are there any additional features or protections provided by XC6118C35DGR-G? A: Yes, XC6118C35DGR-G includes built-in hysteresis to prevent output oscillation during power supply voltage fluctuations, ensuring stable reset signals.