이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6118C43DGR-G

XC6118C43DGR-G

Product Overview

Category

XC6118C43DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6118C43DGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow during excessive loads.
  • Thermal shutdown protection: It prevents damage due to overheating by shutting down the regulator when the temperature exceeds a certain threshold.

Package

XC6118C43DGR-G is available in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of XC6118C43DGR-G lies in its ability to provide stable and regulated voltage to ensure proper functioning of electronic circuits.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 4.3V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (at 100mA)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6118C43DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: Maintains a constant output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: Limits the current flow to protect the circuit from damage.
  • Thermal shutdown protection: Prevents overheating by shutting down the regulator when the temperature exceeds a safe limit.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable operation of electronic circuits.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Overcurrent and thermal shutdown protection enhance circuit safety.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6118C43DGR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a constant output voltage. The overcurrent and thermal shutdown protection mechanisms ensure the safety and longevity of the regulator.

Detailed Application Field Plans

XC6118C43DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable audio players - Mobile phones - Wearable devices - IoT modules

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C43DGR-G are: - LM1117-4.3 - MCP1700-4.3 - LP2985-4.3 - TPS78230

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.

Word count: 439 words

기술 솔루션에 XC6118C43DGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6118C43DGR-G in technical solutions:

  1. Q: What is XC6118C43DGR-G? A: XC6118C43DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C43DGR-G? A: The operating voltage range of XC6118C43DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C43DGR-G help in technical solutions? A: XC6118C43DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset voltage threshold of XC6118C43DGR-G? A: The typical reset voltage threshold of XC6118C43DGR-G is 4.3V.

  5. Q: Can XC6118C43DGR-G be used in battery-powered applications? A: Yes, XC6118C43DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Does XC6118C43DGR-G have any built-in delay time for the reset signal? A: Yes, XC6118C43DGR-G has a built-in delay time of typically 200ms to ensure stable operation during power-up or power-down transitions.

  7. Q: Is XC6118C43DGR-G available in a small package? A: Yes, XC6118C43DGR-G is available in a small SOT-25 package, which makes it suitable for space-constrained applications.

  8. Q: Can XC6118C43DGR-G be used in automotive applications? A: Yes, XC6118C43DGR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.

  9. Q: Does XC6118C43DGR-G have any additional features? A: Yes, XC6118C43DGR-G has an open-drain output, which allows for flexibility in connecting to different types of microcontrollers or digital circuits.

  10. Q: Where can I find more information about XC6118C43DGR-G? A: You can find more detailed information about XC6118C43DGR-G in the datasheet provided by the manufacturer or on their official website.