XC6118N08BGR-G

Product Overview

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

Package: SOT-89
Essence: Low dropout voltage regulator
Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

The specifications of XC6118N08BGR-G are as follows:

Input Voltage Range: 2.5V - 6.0V
Output Voltage: 0.8V
Maximum Output Current: 150mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 40µA (typical)
Operating Temperature Range: -40°C to +85°C

Pin Configuration

The pin configuration of XC6118N08BGR-G is as follows:

```

| | --| VIN VOUT|-- --| GND EN |-- |___________| ```

Functional Features

Low dropout voltage: The XC6118N08BGR-G has a low dropout voltage, allowing it to regulate the output voltage even when the input voltage is close to the desired output voltage.
Low quiescent current: It has a low quiescent current, which minimizes power consumption when the device is in standby or idle mode.
Thermal shutdown protection: The regulator includes thermal shutdown protection to prevent damage due to excessive temperature.

Advantages and Disadvantages

Advantages

Small package size: The SOT-89 package makes it suitable for space-constrained applications.
Low dropout voltage: Enables efficient voltage regulation even with low input voltages.
Low quiescent current: Helps conserve power in battery-powered devices.

Disadvantages

Limited maximum output current: The XC6118N08BGR-G can only provide a maximum output current of 150mA, which may not be sufficient for high-power applications.
Narrow input voltage range: The input voltage range is limited to 2.5V - 6.0V, which may restrict its use in certain applications.

Working Principles

The XC6118N08BGR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6118N08BGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to XC6118N08BGR-G are: - XC6201P332MR-G - XC6220N282MR-G - XC6219B182MR-G - XC6220N202MR-G - XC6220N302MR-G

These models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 309 words

기술 솔루션에 XC6118N08BGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6118N08BGR-G in technical solutions:

Q: What is XC6118N08BGR-G? A: XC6118N08BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.
Q: What is the operating voltage range of XC6118N08BGR-G? A: The operating voltage range of XC6118N08BGR-G is typically between 0.8V and 6.0V.
Q: How does XC6118N08BGR-G work? A: XC6118N08BGR-G monitors the input voltage and provides an output signal when the voltage falls below a certain threshold, indicating a power failure or low voltage condition.
Q: What is the output type of XC6118N08BGR-G? A: XC6118N08BGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.
Q: Can XC6118N08BGR-G be used in battery-powered applications? A: Yes, XC6118N08BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the accuracy of the voltage detection in XC6118N08BGR-G? A: The voltage detection accuracy of XC6118N08BGR-G is typically ±1.0%.
Q: Is XC6118N08BGR-G suitable for automotive applications? A: Yes, XC6118N08BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6118N08BGR-G be used in high-temperature environments? A: Yes, XC6118N08BGR-G has an operating temperature range of -40°C to +105°C, making it suitable for high-temperature environments.
Q: Does XC6118N08BGR-G have built-in hysteresis? A: Yes, XC6118N08BGR-G has a built-in hysteresis of typically 5% to prevent oscillation and ensure stable voltage detection.
Q: What package does XC6118N08BGR-G come in? A: XC6118N08BGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N08BGR-G.