XC6118N18BGR-G belongs to the category of voltage regulators.
It is primarily used for voltage regulation in electronic circuits.
The specifications of XC6118N18BGR-G are as follows:
The pin configuration of XC6118N18BGR-G is as follows:
XC6118N18BGR-G offers the following functional features:
Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption. - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability.
Disadvantages: - Limited output current capacity (150mA).
XC6118N18BGR-G operates based on the principle of linear voltage regulation. It regulates the input voltage to a stable output voltage of 1.8V by adjusting the internal resistance.
XC6118N18BGR-G finds applications in various electronic devices and circuits, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT (Internet of Things) devices
Some alternative models that can be considered as alternatives to XC6118N18BGR-G are: - XC6201P182MR-G - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 244 words
Sure! Here are 10 common questions and answers related to the application of XC6118N18BGR-G in technical solutions:
Q: What is XC6118N18BGR-G? A: XC6118N18BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6118N18BGR-G? A: The operating voltage range of XC6118N18BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N18BGR-G help in technical solutions? A: XC6118N18BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a certain level, ensuring proper system initialization and preventing data corruption.
Q: Can XC6118N18BGR-G be used in battery-powered applications? A: Yes, XC6118N18BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: What is the output type of XC6118N18BGR-G? A: XC6118N18BGR-G has an open-drain output, which allows for flexibility in connecting to different microcontrollers or logic circuits.
Q: What is the typical reset threshold voltage of XC6118N18BGR-G? A: The typical reset threshold voltage of XC6118N18BGR-G is 1.8V, but it can be customized to different voltage levels based on specific requirements.
Q: Does XC6118N18BGR-G have a built-in delay circuit? A: Yes, XC6118N18BGR-G has a built-in delay circuit that provides an adjustable reset delay time, typically ranging from 1ms to 100ms, allowing for proper power stabilization before system initialization.
Q: Can XC6118N18BGR-G be used in automotive applications? A: Yes, XC6118N18BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards, ensuring reliable operation in harsh environments.
Q: What is the package type of XC6118N18BGR-G? A: XC6118N18BGR-G is available in a compact SOT-25 package, which is small and easy to integrate into space-constrained designs.
Q: Is XC6118N18BGR-G RoHS compliant? A: Yes, XC6118N18BGR-G is RoHS (Restriction of Hazardous Substances) compliant, making it environmentally friendly and safe to use in various applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N18BGR-G.