XC6118N22AGR-G belongs to the category of voltage regulators.
It is commonly used for regulating voltage in electronic circuits.
XC6118N22AGR-G is available in a small SOT-23-5 package.
The essence of XC6118N22AGR-G is its ability to regulate voltage with high precision and efficiency.
It is typically packaged in reels, with each reel containing a specific quantity of XC6118N22AGR-G units.
XC6118N22AGR-G has the following pin configuration:
XC6118N22AGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 2.2V. The enable pin (EN) can be used to turn the regulator on or off.
XC6118N22AGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable audio players - Wearable devices - IoT modules - Mobile phones - Digital cameras
Some alternative models that can be considered as alternatives to XC6118N22AGR-G are: - LM1117-2.2 - MCP1700-2.2 - TS2937-2.2 - LP2985-2.2
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, XC6118N22AGR-G is a voltage regulator known for its compact size, low power consumption, and high precision voltage regulation. It is widely used in various electronic devices and offers advantages such as wide input voltage range and overcurrent protection. However, it has limitations in terms of output current capacity and dropout voltage.
Sure! Here are 10 common questions and answers related to the application of XC6118N22AGR-G in technical solutions:
Question: What is XC6118N22AGR-G?
- Answer: XC6118N22AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Question: What is the operating voltage range of XC6118N22AGR-G?
- Answer: The operating voltage range of XC6118N22AGR-G is typically between 0.9V and 6.0V.
Question: How does XC6118N22AGR-G help in technical solutions?
- Answer: XC6118N22AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.
Question: What is the output type of XC6118N22AGR-G?
- Answer: XC6118N22AGR-G has an active-low CMOS output.
Question: What is the typical reset threshold voltage of XC6118N22AGR-G?
- Answer: The typical reset threshold voltage of XC6118N22AGR-G is 2.2V.
Question: Can XC6118N22AGR-G be used in battery-powered applications?
- Answer: Yes, XC6118N22AGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Question: Does XC6118N22AGR-G have any built-in delay for the reset signal?
- Answer: Yes, XC6118N22AGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.
Question: Is XC6118N22AGR-G suitable for automotive applications?
- Answer: Yes, XC6118N22AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Question: Can XC6118N22AGR-G be used in industrial control systems?
- Answer: Yes, XC6118N22AGR-G can be used in industrial control systems as it provides reliable voltage monitoring and reset functionality.
Question: What is the package type of XC6118N22AGR-G?
- Answer: XC6118N22AGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.