XC6118N24DGR-G

Product Overview

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

Package: DFN (Dual Flat No-leads)
Essence: Low dropout voltage regulator
Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

The specifications for XC6118N24DGR-G are as follows:

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 2.4V
Output Current: 150mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 40μA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N24DGR-G has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
VOUT: Output voltage pin
CE: Chip enable pin

Functional Features

Low dropout voltage: The XC6118N24DGR-G has a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the output voltage.
Low quiescent current: The device consumes minimal current when in standby mode, reducing power consumption.
Overcurrent protection: It incorporates overcurrent protection to safeguard connected components from excessive current flow.
Thermal shutdown protection: The regulator includes thermal shutdown protection to prevent damage due to overheating.

Advantages and Disadvantages

Advantages

Compact package size
Wide input voltage range
Low dropout voltage
Low quiescent current

Disadvantages

Limited output current capacity (150mA)

Working Principles

XC6118N24DGR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The device compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6118N24DGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N24DGR-G are: - LM1117-2.4: A popular 2.4V voltage regulator from Texas Instruments. - MCP1700-2402E/TO: A low dropout voltage regulator from Microchip Technology. - TS2937CZ-2.4: Another 2.4V voltage regulator option from STMicroelectronics.

These alternative models offer similar functionality and characteristics, providing flexibility in design choices.

(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)

기술 솔루션에 XC6118N24DGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6118N24DGR-G in technical solutions:

Q: What is XC6118N24DGR-G? A: XC6118N24DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118N24DGR-G? A: The operating voltage range of XC6118N24DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N24DGR-G help in technical solutions? A: XC6118N24DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: Can XC6118N24DGR-G be used in battery-powered applications? A: Yes, XC6118N24DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the output type of XC6118N24DGR-G? A: XC6118N24DGR-G has an active-low CMOS output, which means the output goes low when the voltage drops below the threshold.
Q: What is the typical reset voltage threshold of XC6118N24DGR-G? A: The typical reset voltage threshold of XC6118N24DGR-G is 2.4V.
Q: Is XC6118N24DGR-G available in different package options? A: Yes, XC6118N24DGR-G is available in a SOT-25 package, which is a small surface-mount package.
Q: Can XC6118N24DGR-G be used in automotive applications? A: Yes, XC6118N24DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Does XC6118N24DGR-G have built-in hysteresis? A: Yes, XC6118N24DGR-G has built-in hysteresis, which helps to prevent oscillation and noise caused by voltage fluctuations near the threshold.
Q: What is the temperature range of XC6118N24DGR-G? A: The temperature range of XC6118N24DGR-G is typically between -40°C and +85°C, making it suitable for a wide range of operating conditions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for XC6118N24DGR-G.