Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6118N31AGR-G
자세히보기 데이터시트

XC6118N31AGR-G

Product Overview

Category

XC6118N31AGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6118N31AGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit from excessive current flow.
  • Thermal shutdown protection: It prevents damage due to overheating.

Package

XC6118N31AGR-G is available in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of XC6118N31AGR-G lies in its ability to provide reliable voltage regulation in a compact form factor.

Packaging/Quantity

XC6118N31AGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.1V
  • Dropout voltage: 150mV (typical)
  • Quiescent current: 25μA (typical)
  • Output current: Up to 100mA
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6118N31AGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6118N31AGR-G maintains a constant output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It limits the output current to prevent damage to the circuit.
  • Thermal shutdown protection: It shuts down the device if the temperature exceeds a safe threshold.

Advantages and Disadvantages

Advantages

  • Compact size
  • Low dropout voltage
  • Low quiescent current
  • Overcurrent and thermal protection

Disadvantages

  • Limited output current capacity (up to 100mA)

Working Principles

XC6118N31AGR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6118N31AGR-G finds applications in various electronic devices, including: - Mobile phones - Portable media players - Digital cameras - Wireless communication modules - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N31AGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 408 words

기술 솔루션에 XC6118N31AGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6118N31AGR-G in technical solutions:

  1. Question: What is XC6118N31AGR-G?
    Answer: XC6118N31AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6118N31AGR-G?
    Answer: The operating voltage range of XC6118N31AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6118N31AGR-G help in technical solutions?
    Answer: XC6118N31AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization and preventing data corruption.

  4. Question: What is the output type of XC6118N31AGR-G?
    Answer: XC6118N31AGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6118N31AGR-G?
    Answer: The typical reset threshold voltage of XC6118N31AGR-G is 3.1V.

  6. Question: Can XC6118N31AGR-G be used in battery-powered applications?
    Answer: Yes, XC6118N31AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6118N31AGR-G have a built-in delay time for the reset signal?
    Answer: Yes, XC6118N31AGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: Can XC6118N31AGR-G be used in automotive applications?
    Answer: Yes, XC6118N31AGR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and system initialization are required.

  9. Question: What is the package type of XC6118N31AGR-G?
    Answer: XC6118N31AGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Is XC6118N31AGR-G RoHS compliant?
    Answer: Yes, XC6118N31AGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N31AGR-G.