이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6118N31CGR-G

XC6118N31CGR-G

Product Overview

Category

XC6118N31CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6118N31CGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when there is no load.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
  • Short-circuit protection: It safeguards against short circuits, preventing damage to the circuitry.

Package

XC6118N31CGR-G is available in a compact surface-mount package.

Essence

The essence of XC6118N31CGR-G lies in its ability to regulate and maintain a stable voltage supply, ensuring proper functioning of electronic devices.

Packaging/Quantity

XC6118N31CGR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.1V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (at 100mA)
  • Quiescent current: 30µA
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6118N31CGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6118N31CGR-G maintains a constant output voltage regardless of variations in the input voltage.
  • Low dropout voltage: It can operate efficiently even when the input voltage is close to the desired output voltage, minimizing power loss.
  • Low quiescent current: The regulator consumes minimal current when there is no load, conserving power.
  • Thermal shutdown protection: It automatically shuts down if the temperature exceeds a safe limit, protecting the device from damage.
  • Short-circuit protection: XC6118N31CGR-G safeguards against short circuits, preventing damage to the circuitry.

Advantages and Disadvantages

Advantages

  • Stable output voltage regulation
  • Low dropout voltage for efficient operation
  • Low quiescent current for power conservation
  • Thermal shutdown protection for device safety
  • Short-circuit protection for circuitry protection

Disadvantages

  • Limited maximum output current (150mA)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

XC6118N31CGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. By continuously monitoring and adjusting, it compensates for any variations in the input voltage, ensuring a constant output voltage.

Detailed Application Field Plans

XC6118N31CGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6118N31CGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

기술 솔루션에 XC6118N31CGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6118N31CGR-G in technical solutions:

  1. Q: What is XC6118N31CGR-G? A: XC6118N31CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118N31CGR-G? A: The operating voltage range of XC6118N31CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118N31CGR-G help in technical solutions? A: XC6118N31CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset voltage threshold of XC6118N31CGR-G? A: The typical reset voltage threshold of XC6118N31CGR-G is 3.1V.

  5. Q: Can XC6118N31CGR-G be used in battery-powered applications? A: Yes, XC6118N31CGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Q: Does XC6118N31CGR-G have any built-in delay for the reset signal? A: Yes, XC6118N31CGR-G has a built-in delay of approximately 200ms to ensure stable operation during power-up or voltage fluctuations.

  7. Q: Is XC6118N31CGR-G suitable for automotive applications? A: Yes, XC6118N31CGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  8. Q: Can XC6118N31CGR-G be used in industrial control systems? A: Absolutely, XC6118N31CGR-G can be used in industrial control systems to ensure proper functioning and protection against voltage drops.

  9. Q: Does XC6118N31CGR-G have any additional features or protections? A: Yes, XC6118N31CGR-G includes a hysteresis function to prevent oscillation near the threshold voltage and has built-in overcurrent protection.

  10. Q: What package options are available for XC6118N31CGR-G? A: XC6118N31CGR-G is available in various package options, such as SOT-25, SOT-89, and USP-4B, providing flexibility for different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N31CGR-G.