XC6118N38CGR-G belongs to the category of voltage regulators.
It is primarily used for regulating voltage in electronic circuits.
The specifications of XC6118N38CGR-G are as follows:
XC6118N38CGR-G has the following pin configuration:
The functional features of XC6118N38CGR-G include:
Advantages: - Low dropout voltage ensures efficient power conversion. - Low quiescent current minimizes power consumption. - High output voltage accuracy provides stable voltage regulation. - Overcurrent protection safeguards the circuit from damage. - Thermal shutdown protection prevents overheating.
Disadvantages: - Limited output current capacity (150mA).
XC6118N38CGR-G operates based on the principle of voltage regulation. It takes an input voltage within the range of 2.5V to 6.0V and regulates it to a stable output voltage of 3.8V. The internal circuitry of the IC ensures that the output voltage remains constant even when the input voltage or load conditions vary.
XC6118N38CGR-G finds applications in various electronic devices and circuits, including but not limited to:
Some alternative models that can be considered as alternatives to XC6118N38CGR-G are:
These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.
In conclusion, XC6118N38CGR-G is a voltage regulator IC with a package type of CGR (SOT-89). It provides stable voltage regulation with low dropout voltage and quiescent current. The IC has various applications in battery-powered devices, portable electronics, IoT devices, and more. Alternative models are available for consideration based on specific needs.
Sure! Here are 10 common questions and answers related to the application of XC6118N38CGR-G in technical solutions:
Q: What is XC6118N38CGR-G? A: XC6118N38CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118N38CGR-G? A: The operating voltage range of XC6118N38CGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N38CGR-G help in technical solutions? A: XC6118N38CGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning due to low voltage conditions.
Q: Can XC6118N38CGR-G be used in battery-powered applications? A: Yes, XC6118N38CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the typical reset threshold voltage of XC6118N38CGR-G? A: The typical reset threshold voltage of XC6118N38CGR-G is 3.8V.
Q: Does XC6118N38CGR-G have an adjustable reset threshold voltage? A: No, XC6118N38CGR-G has a fixed reset threshold voltage and does not provide an option for adjustment.
Q: What is the output type of XC6118N38CGR-G? A: XC6118N38CGR-G has an open-drain output type, which requires an external pull-up resistor.
Q: Can XC6118N38CGR-G be used in automotive applications? A: Yes, XC6118N38CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the operating temperature range of XC6118N38CGR-G? A: The operating temperature range of XC6118N38CGR-G is typically between -40°C and +85°C.
Q: Is XC6118N38CGR-G available in different package options? A: Yes, XC6118N38CGR-G is available in various package options, such as SOT-25 and USP-4B, to accommodate different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N38CGR-G.