XC6118N42DGR-G

Product Overview

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

Package: DFN (Dual Flat No-Lead)
Essence: Low dropout voltage regulator
Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications of XC6118N42DGR-G are as follows:

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 4.2V
Dropout Voltage: 200mV at 100mA
Output Current: 100mA
Quiescent Current: 30µA
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N42DGR-G has the following pin configuration:

VIN: Input voltage pin
GND: Ground pin
EN: Enable pin
VOUT: Output voltage pin

Functional Features

The functional features of XC6118N42DGR-G include:

Low dropout voltage for efficient regulation
Low quiescent current for power-saving operation
Built-in overcurrent protection
Thermal shutdown protection
Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation - Low quiescent current for power-saving operation - Built-in protection features enhance reliability

Disadvantages: - Limited output current capacity (100mA)

Working Principles

XC6118N42DGR-G works by regulating the input voltage to a stable output voltage of 4.2V. It achieves this by utilizing a feedback mechanism that adjusts the internal circuitry to maintain the desired output voltage. The low dropout voltage ensures efficient regulation even when the input voltage is close to the desired output voltage.

Detailed Application Field Plans

XC6118N42DGR-G finds applications in various electronic devices and circuits, including but not limited to:

Battery-powered devices
Portable electronics
IoT (Internet of Things) devices
Wearable devices
Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N42DGR-G are:

XC6206P332MR-G: 3.3V voltage regulator with similar characteristics
XC6220B332MR-G: 3.3V voltage regulator with higher output current capacity
XC6219B182MR-G: 1.8V voltage regulator with similar characteristics
XC6220C502MR-G: 5.0V voltage regulator with higher output current capacity

These alternative models provide flexibility in choosing a voltage regulator based on specific requirements and constraints.

In conclusion, XC6118N42DGR-G is a voltage regulator with low dropout voltage, suitable for various applications in electronic circuits. Its compact package, efficient regulation, and built-in protection features make it a reliable choice for voltage regulation needs.

기술 솔루션에 XC6118N42DGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6118N42DGR-G in technical solutions:

Q: What is XC6118N42DGR-G? A: XC6118N42DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118N42DGR-G? A: The operating voltage range of XC6118N42DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N42DGR-G help in technical solutions? A: XC6118N42DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the output type of XC6118N42DGR-G? A: XC6118N42DGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.
Q: What is the typical reset threshold voltage of XC6118N42DGR-G? A: The typical reset threshold voltage of XC6118N42DGR-G is 4.2V.
Q: Can XC6118N42DGR-G be used in battery-powered applications? A: Yes, XC6118N42DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: Does XC6118N42DGR-G have a built-in delay circuit? A: Yes, XC6118N42DGR-G has a built-in delay circuit that provides a fixed delay time of typically 200ms to prevent false resets during power supply fluctuations.
Q: What is the package type of XC6118N42DGR-G? A: XC6118N42DGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Q: Can XC6118N42DGR-G be used in automotive applications? A: Yes, XC6118N42DGR-G is AEC-Q100 qualified, making it suitable for automotive applications where reliable voltage monitoring and reset functionality are required.
Q: Are there any application notes or reference designs available for XC6118N42DGR-G? A: Yes, Torex Semiconductor provides application notes and reference designs for XC6118N42DGR-G, which can help in understanding its usage and integration into various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer.