XC6118N48DGR-G

Product Overview

Use

It is commonly used in electronic circuits to regulate and stabilize the output voltage.

Characteristics

Package: DFN (Dual Flat No-Lead)
Essence: Voltage regulator IC
Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications for XC6118N48DGR-G are as follows:

Input Voltage Range: 2.5V - 6.0V
Output Voltage: 4.8V
Output Current: 150mA
Dropout Voltage: 200mV @ 100mA
Quiescent Current: 30µA
Operating Temperature Range: -40°C to +85°C

Pin Configuration

The detailed pin configuration for XC6118N48DGR-G is as follows:

VIN (Input Voltage)
GND (Ground)
EN (Enable)
VOUT (Output Voltage)

Functional Features

XC6118N48DGR-G offers the following functional features:

Low dropout voltage
Low quiescent current
Overcurrent protection
Thermal shutdown protection
Short-circuit protection

Advantages and Disadvantages

Advantages: - Stable and regulated output voltage - Low power consumption - Protection features ensure device safety

Disadvantages: - Limited output current capacity - Restricted input voltage range

Working Principles

XC6118N48DGR-G works by comparing the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a constant output voltage despite changes in the input voltage or load conditions. The enable pin allows the user to control the regulator's operation.

Detailed Application Field Plans

XC6118N48DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N48DGR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6220B482MR-G - XC6219B482MR-G

These models offer similar voltage regulation capabilities and package options.

In conclusion, XC6118N48DGR-G is a voltage regulator IC with stable output voltage, low power consumption, and protection features. It is commonly used in battery-powered devices, portable electronics, and embedded systems. Alternative models such as XC6206P332MR-G, XC6220B332MR-G, XC6219B332MR-G, XC6220B482MR-G, and XC6219B482MR-G can also be considered for similar applications.

기술 솔루션에 XC6118N48DGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6118N48DGR-G in technical solutions:

Q: What is XC6118N48DGR-G? A: XC6118N48DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118N48DGR-G? A: The operating voltage range of XC6118N48DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118N48DGR-G help in technical solutions? A: XC6118N48DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level.
Q: Can XC6118N48DGR-G be used in battery-powered applications? A: Yes, XC6118N48DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the output type of XC6118N48DGR-G? A: XC6118N48DGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.
Q: What is the typical reset threshold voltage of XC6118N48DGR-G? A: The typical reset threshold voltage of XC6118N48DGR-G is 4.8V.
Q: Does XC6118N48DGR-G have built-in hysteresis? A: Yes, XC6118N48DGR-G has built-in hysteresis, which helps to prevent oscillation and ensure stable reset signals.
Q: Can XC6118N48DGR-G be used in automotive applications? A: Yes, XC6118N48DGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.
Q: What is the package type of XC6118N48DGR-G? A: XC6118N48DGR-G comes in a small SOT-25 package, which is compact and easy to integrate into PCB designs.
Q: Is XC6118N48DGR-G RoHS compliant? A: Yes, XC6118N48DGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118N48DGR-G.