Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6118N50AGR-G
자세히보기 데이터시트

XC6118N50AGR-G

Product Overview

Category

XC6118N50AGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Package: SOT-89
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The specifications of XC6118N50AGR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 5.0V ±2%
  • Dropout Voltage: 200mV (typical)
  • Maximum Output Current: 150mA
  • Quiescent Current: 40µA (typical)
  • Line Regulation: ±0.1% (typical)
  • Load Regulation: ±0.3% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N50AGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

The functional features of XC6118N50AGR-G include:

  • Low dropout voltage
  • Low quiescent current
  • High output voltage accuracy
  • Excellent line and load regulation
  • Thermal shutdown protection
  • Short circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient power conversion. - Low quiescent current minimizes power consumption. - Excellent line and load regulation provides stable output voltage. - Thermal shutdown and short circuit protection enhance device reliability.

Disadvantages: - Limited maximum output current may restrict usage in high-power applications. - Narrow input voltage range limits compatibility with certain systems.

Working Principles

XC6118N50AGR-G is a low dropout voltage regulator that regulates the output voltage by maintaining a constant voltage difference between the input and output terminals. It utilizes a feedback mechanism to adjust the internal pass transistor, ensuring a stable output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

XC6118N50AGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models to XC6118N50AGR-G are: - XC6118N33AGR-G: 3.3V output voltage variant - XC6118N25AGR-G: 2.5V output voltage variant - XC6118N18AGR-G: 1.8V output voltage variant - XC6118N12AGR-G: 1.2V output voltage variant

These alternative models provide different output voltage options to suit specific application requirements.

Word count: 314 words

기술 솔루션에 XC6118N50AGR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6118N50AGR-G in technical solutions:

  1. Question: What is XC6118N50AGR-G?
    - Answer: XC6118N50AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6118N50AGR-G?
    - Answer: The operating voltage range of XC6118N50AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6118N50AGR-G help in technical solutions?
    - Answer: XC6118N50AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6118N50AGR-G?
    - Answer: XC6118N50AGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6118N50AGR-G?
    - Answer: The typical reset threshold voltage of XC6118N50AGR-G is 5.0V.

  6. Question: Can XC6118N50AGR-G be used in battery-powered applications?
    - Answer: Yes, XC6118N50AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6118N50AGR-G have any built-in delay for the reset signal?
    - Answer: Yes, XC6118N50AGR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: What is the temperature range in which XC6118N50AGR-G can operate?
    - Answer: XC6118N50AGR-G can operate within a temperature range of -40°C to +85°C.

  9. Question: Can XC6118N50AGR-G be used in automotive applications?
    - Answer: Yes, XC6118N50AGR-G is AEC-Q100 qualified and can be used in automotive applications that require reliable voltage monitoring and reset functionality.

  10. Question: Is XC6118N50AGR-G available in different package options?
    - Answer: Yes, XC6118N50AGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different PCB layouts and assembly processes.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.