이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6122C426MR-G

XC6122C426MR-G

Product Overview

Category

XC6122C426MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: SOT-23-5
  • Essence: Voltage regulator IC
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications of XC6122C426MR-G are as follows:

  • Input Voltage Range: 1.7V to 6.0V
  • Output Voltage: 4.26V ±2%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C426MR-G has a total of five pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin

Functional Features

The functional features of XC6122C426MR-G include:

  • Low dropout voltage
  • Low quiescent current
  • High output voltage accuracy
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse current protection

Advantages and Disadvantages

Advantages: - Wide input voltage range - Small package size - Low power consumption - Stable output voltage

Disadvantages: - Limited maximum output current - Relatively high dropout voltage

Working Principles

XC6122C426MR-G is a linear voltage regulator that uses a feedback mechanism to maintain a stable output voltage. It operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6122C426MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C426MR-G are: - XC6122C4267MR-G - XC6122C4265MR-G - XC6122C4263MR-G - XC6122C4261MR-G

These models have similar specifications and functionality, providing flexibility in choosing the most suitable voltage regulator for specific applications.

In conclusion, XC6122C426MR-G is a voltage regulator IC with a wide input voltage range, stable output voltage, and low power consumption. It is commonly used in battery-powered and portable electronic devices. While it has limitations in terms of maximum output current and dropout voltage, there are alternative models available to meet specific requirements.

기술 솔루션에 XC6122C426MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6122C426MR-G in technical solutions:

  1. Q: What is XC6122C426MR-G? A: XC6122C426MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6122C426MR-G? A: The operating voltage range of XC6122C426MR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6122C426MR-G help in technical solutions? A: XC6122C426MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset voltage threshold of XC6122C426MR-G? A: The typical reset voltage threshold of XC6122C426MR-G is 4.26V.

  5. Q: Can XC6122C426MR-G be used in battery-powered applications? A: Yes, XC6122C426MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: Does XC6122C426MR-G have any built-in delay for the reset signal? A: Yes, XC6122C426MR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  7. Q: Is XC6122C426MR-G suitable for automotive applications? A: Yes, XC6122C426MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6122C426MR-G be used in industrial control systems? A: Yes, XC6122C426MR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +85°C.

  9. Q: Does XC6122C426MR-G have any additional features or protection mechanisms? A: Yes, XC6122C426MR-G has built-in overvoltage detection and hysteresis to prevent false triggering due to voltage fluctuations or noise.

  10. Q: What package does XC6122C426MR-G come in? A: XC6122C426MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6122C426MR-G.