Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6122E742MR-G
자세히보기 데이터시트

XC6122E742MR-G

Product Overview

Category

XC6122E742MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 200mA
  • Low Quiescent Current: 1.0µA (typical)
  • Low Dropout Voltage: 160mV at 100mA (typical)
  • Package Type: SOT-23-5
  • Operating Temperature Range: -40°C to +85°C

Package

XC6122E742MR-G is packaged in a SOT-23-5 package, which is a small surface-mount package with five pins.

Essence

The essence of XC6122E742MR-G is its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

XC6122E742MR-G is typically available in reels or tape and reel packaging. The quantity per reel is usually 3000 pieces.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 160mV at 100mA (typical)
  • Quiescent Current: 1.0µA (typical)
  • Line Regulation: ±0.3% (typical)
  • Load Regulation: ±0.3% (typical)
  • Ripple Rejection Ratio: 70dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E742MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. NC: No connection pin
  4. VOUT: Output voltage pin
  5. EN: Enable pin

Functional Features

  • Low quiescent current for power-saving applications
  • Wide input voltage range for compatibility with various power sources
  • Low dropout voltage for efficient voltage regulation
  • Excellent line and load regulation for stable output voltage
  • Good ripple rejection ratio for noise reduction

Advantages and Disadvantages

Advantages

  • Low quiescent current enables power-saving operation.
  • Wide input voltage range allows flexibility in power source selection.
  • Small package size makes it suitable for space-constrained designs.
  • Good line and load regulation ensure stable output voltage.

Disadvantages

  • Maximum output current of 200mA may not be sufficient for high-power applications.
  • Dropout voltage of 160mV at 100mA may cause some power loss.

Working Principles

XC6122E742MR-G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage within the specified range. The enable pin can be used to turn the regulator on or off.

Detailed Application Field Plans

XC6122E742MR-G can be used in various electronic devices and applications, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to XC6122E742MR-G are: - XC6122E742MR-G-ND - XC6122E742MR-G-F - XC6122E742MR-G-H

These alternative models have similar specifications and functionality, providing options for different sourcing or availability requirements.

Word count: 520 words

기술 솔루션에 XC6122E742MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6122E742MR-G in technical solutions:

  1. Question: What is XC6122E742MR-G?
    Answer: XC6122E742MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6122E742MR-G?
    Answer: The operating voltage range of XC6122E742MR-G is from 0.6V to 6.0V.

  3. Question: How does XC6122E742MR-G work?
    Answer: XC6122E742MR-G works by comparing the input voltage with a reference voltage. When the input voltage falls below or exceeds the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6122E742MR-G?
    Answer: XC6122E742MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Question: What is the quiescent current consumption of XC6122E742MR-G?
    Answer: The quiescent current consumption of XC6122E742MR-G is typically 1.0µA.

  6. Question: Can XC6122E742MR-G be used for overvoltage protection?
    Answer: No, XC6122E742MR-G is not designed for overvoltage protection. It is primarily used for undervoltage detection.

  7. Question: What is the hysteresis voltage of XC6122E742MR-G?
    Answer: The hysteresis voltage of XC6122E742MR-G is typically 0.1V.

  8. Question: What is the temperature range for XC6122E742MR-G?
    Answer: XC6122E742MR-G has an operating temperature range of -40°C to +85°C.

  9. Question: Can XC6122E742MR-G be used in battery-powered applications?
    Answer: Yes, XC6122E742MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  10. Question: Is XC6122E742MR-G RoHS compliant?
    Answer: Yes, XC6122E742MR-G is RoHS (Restriction of Hazardous Substances) compliant, which means it meets the environmental standards set by the European Union.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.