XC6123A328ER-G
Product Overview
Category
XC6123A328ER-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123A328ER-G comes in a small surface-mount package.
Essence
The essence of XC6123A328ER-G lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
It is typically packaged in reels and available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Dropout Voltage: 200mV (typical)
- Maximum Output Current: 150mA
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123A328ER-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6123A328ER-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- High efficiency results in minimal power loss.
- Wide input voltage range provides flexibility in various applications.
- Overcurrent and thermal shutdown protection enhance device reliability.
Disadvantages
- Limited maximum output current may restrict usage in high-power applications.
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
XC6123A328ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.
Detailed Application Field Plans
XC6123A328ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - IoT devices - Wearable devices - Battery-powered systems - Industrial automation
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123A328ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.
In conclusion, XC6123A328ER-G is a compact and efficient voltage regulator with a wide range of applications. Its features, such as overcurrent and thermal shutdown protection, make it a reliable choice for various electronic devices. However, its limitations in terms of maximum output current and dropout voltage should be taken into consideration when selecting an appropriate model.
기술 솔루션에 XC6123A328ER-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of XC6123A328ER-G in technical solutions:
Q: What is XC6123A328ER-G? A: XC6123A328ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123A328ER-G? A: The operating voltage range of XC6123A328ER-G is typically between 0.8V and 6.0V.
Q: How does XC6123A328ER-G work? A: XC6123A328ER-G works by continuously monitoring the input voltage and comparing it with a preset threshold voltage. When the input voltage falls below the threshold, an internal reset signal is generated.
Q: What is the purpose of using XC6123A328ER-G in a technical solution? A: XC6123A328ER-G is commonly used to ensure stable operation of electronic devices by providing a reliable power supply monitoring function. It can help prevent damage or data loss due to undervoltage conditions.
Q: Can XC6123A328ER-G be used in battery-powered applications? A: Yes, XC6123A328ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the output type of XC6123A328ER-G? A: XC6123A328ER-G has an open-drain output, which means it can be easily connected to other devices or microcontrollers.
Q: Is XC6123A328ER-G suitable for automotive applications? A: Yes, XC6123A328ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Can XC6123A328ER-G be used in high-temperature environments? A: Yes, XC6123A328ER-G has a wide operating temperature range of -40°C to +105°C, making it suitable for use in high-temperature environments.
Q: Does XC6123A328ER-G have built-in hysteresis? A: Yes, XC6123A328ER-G has built-in hysteresis, which helps prevent oscillation or chattering of the output when the input voltage is near the threshold.
Q: Are there any application notes or reference designs available for XC6123A328ER-G? A: Yes, Torex Semiconductor provides application notes and reference designs for XC6123A328ER-G on their website, which can help designers integrate the IC into their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.