Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6123D521MR-G
자세히보기 데이터시트

XC6123D521MR-G

Product Overview

Category

XC6123D521MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123D521MR-G comes in a small surface-mount package.

Essence

The essence of XC6123D521MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels and available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123D521MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: Provides a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: Safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: Prevents overheating by shutting down the device when the temperature exceeds a certain threshold.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal protection enhance reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Fixed output voltage may not be adjustable for specific requirements.

Working Principles

XC6123D521MR-G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage.

Detailed Application Field Plans

XC6123D521MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123D521MR-G are: - XC6206P182MR: 1.8V output voltage, 200mA output current - LM1117IMPX-1.8/NOPB: 1.8V output voltage, 800mA output current - MCP1700T-1802E/TT: 1.8V output voltage, 250mA output current

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 346 words

기술 솔루션에 XC6123D521MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6123D521MR-G in technical solutions:

  1. Question: What is XC6123D521MR-G?
    - Answer: XC6123D521MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6123D521MR-G?
    - Answer: The operating voltage range of XC6123D521MR-G is from 0.7V to 6.0V.

  3. Question: How does XC6123D521MR-G work?
    - Answer: XC6123D521MR-G works by comparing the input voltage with a reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal.

  4. Question: What is the output type of XC6123D521MR-G?
    - Answer: XC6123D521MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6123D521MR-G?
    - Answer: The typical quiescent current consumption of XC6123D521MR-G is around 1.0µA.

  6. Question: Can XC6123D521MR-G be used for overvoltage protection?
    - Answer: No, XC6123D521MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.

  7. Question: What is the accuracy of the voltage detection threshold in XC6123D521MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6123D521MR-G is typically ±1.5%.

  8. Question: Can XC6123D521MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123D521MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Question: What is the temperature range of operation for XC6123D521MR-G?
    - Answer: XC6123D521MR-G can operate within a temperature range of -40°C to +85°C.

  10. Question: Is XC6123D521MR-G RoHS compliant?
    - Answer: Yes, XC6123D521MR-G is RoHS (Restriction of Hazardous Substances) compliant, which means it meets the environmental standards set by the European Union.

Please note that these answers are based on general information and specifications. It is always recommended to refer to the datasheet or consult with the manufacturer for specific technical details and application requirements.