Torex Semiconductor Ltd
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XC6123D649MR-G
자세히보기 데이터시트

XC6123D649MR-G

Product Overview

Category

XC6123D649MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123D649MR-G is available in a small surface-mount package.

Essence

The essence of XC6123D649MR-G lies in its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

XC6123D649MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123D649MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6123D649MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: It prevents overheating by shutting down the regulator when the temperature exceeds a certain threshold.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range enables compatibility with various power sources.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low-input voltage scenarios.

Working Principles

XC6123D649MR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6123D649MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123D649MR-G are: - LM1117-3.3: A popular linear voltage regulator with similar specifications. - AP2112: Another compact and efficient voltage regulator option. - TPS79633: A low-dropout voltage regulator suitable for demanding applications.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 408 words

기술 솔루션에 XC6123D649MR-G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XC6123D649MR-G in technical solutions:

  1. Question: What is XC6123D649MR-G?
    - Answer: XC6123D649MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123D649MR-G?
    - Answer: The operating voltage range of XC6123D649MR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6123D649MR-G help in technical solutions?
    - Answer: XC6123D649MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6123D649MR-G?
    - Answer: XC6123D649MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6123D649MR-G?
    - Answer: The typical reset threshold voltage of XC6123D649MR-G is 4.65V.

  6. Question: Can XC6123D649MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123D649MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6123D649MR-G have a built-in delay circuit?
    - Answer: Yes, XC6123D649MR-G has a built-in delay circuit that ensures a stable reset signal is provided for a specified duration (typically 200ms) after the power supply voltage rises above the threshold.

  8. Question: Can XC6123D649MR-G be used in automotive applications?
    - Answer: Yes, XC6123D649MR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and system initialization are required.

  9. Question: What is the package type of XC6123D649MR-G?
    - Answer: XC6123D649MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Is XC6123D649MR-G RoHS compliant?
    - Answer: Yes, XC6123D649MR-G is RoHS compliant, ensuring it meets the environmental standards for hazardous substance restrictions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6123D649MR-G.